logo
  • Research
  • News
  • Projects
  • Publications
  • For students (CZ)
  • About Us
    • About Us
    • Team
    • History
    • Cooperation
  • Contact Us

Publications

All publications and other scientific results can be found on the Brno University of Technology.

  • Comparative Evaluation of Membrane Contactor and Stripping Device for Ammonia Separation

    • Authors: LINDOVSKÝ, J. MAYEROVÁ, K. KALIVODA, J. KRIŠTOF, O.
    • Year: 2025
    • Source: Journal of Fluid Flow, Heat and Mass Transfer (JFFHMT)

  • Improving Oil Cooling Efficiency Using Polymeric Hollow Fibers

    • Authors: LANG, F. BARTULI, E. HVOŽĎA, J. KROULÍKOVÁ, T. BERAN, M. KUČERA, J.
    • Year: 2025
    • Source: Journal of Fluid Flow, Heat and Mass Transfer

  • Inverse calculation of local heat transfer coefficient on generic surfaces in OpenFOAM

    • Authors: BOHÁČEK, J. HNÍZDIL, M. HVOŽĎA, J. FERRO, L. KARIMI-SIBAKI, E. VAKHRUSHEV, A.
    • Year: 2025
    • Source: International Journal of Thermal Sciences

  • Modeling Heat Transfer in Cylindrical Batteries: Spiral-Based Thermal Conductivity Tensor

    • Authors: HVOŽĎA, J. BOHÁČEK, J. VAKHRUSHEV, A. KARIMI-SIBAKI, E.
    • Year: 2025
    • Source: Journal of Fluid Flow Heat and Mass Transfer

  • Polymeric hollow fibre heat exchanger for reducing vehicle CO2 pollution

    • Authors: VANČURA, J. KROULÍKOVÁ, T. BARTULI, E. KŮDELOVÁ, T. VONDRUŠ, J.
    • Year: 2025
    • Source: Applied Thermal Engineering Volume 270, 1 July 2025, 126180

  • Influence of heat treatment on the microstructural evolution of CoCrFeNi high-entropy alloy prepared by Selective Laser Melting

    • Authors: ZHANG, H. ZHENG, Y. YANG, C. HUANG, B. LI, J. DING, Y. LIANG, L. QIU, Z. WANG, H. YANG, Y. TIAN, M. HUANG, Q. WU, Z. BOHÁČEK, J.
    • Year: 2025
    • Source: Journal of Materials Research and Technology Volume 35, March–April 2025, Pages 4920-4928

  • Case Study on Thermal Management of Planar Elements with Various Polymeric Heat Exchangers: Experiment and Simulation

    • Authors: HVOŽĎA, J. MRÁZ, K. RAUDENSKÝ, M. VAKHRUSHEV, A. KARIMI-SIBAKI, E. BOHÁČEK, J.
    • Year: 2024
    • Source: Journal of Thermal Analysis and Calorimetry

  • Assessment of URANS-Type Turbulent Flow Modeling of a Single Port Submerged Entry Nozzle (SEN) for Thin Slab Continuous Casting (TSC) Process

    • Authors: VAKHRUSHEV, A. KARIMI-SIBAKI, E. WU, M. LUDWIG, A. NITZL, G. TANG, Y. HACKL, G. WATZINGER, J. BOHÁČEK, J. KHARICHA, A.
    • Year: 2024
    • Source: Metallurgical and Materials Transactions B

  • A numerical study on effects of current density distribution, turbulence, and magnetohydrodynamics (MHD) on electrolytic gas flow with application to alkaline water electrolysis (AWE)

    • Authors: KARIMI-SIBAKI, E. VAKHRUSHEV, A. WU, M. BOHÁČEK, J. KHARICHA, A.
    • Year: 2024
    • Source: Chemical Engineering Research and Design Volume 208, August 2024, Pages 731-739

  • A Coupled Magnetohydrodynamics (MHD) and Thermal Stress-Strain Model to Explore the Impact of Gas Cooling on Ingot Solidification Shrinkage in Vacuum Arc Remelting (VAR) Process

    • Authors: BOHÁČEK, J. KARIMI-SIBAKI, E. VAKHRUSHEV, A. MRÁZ, K. HVOŽĎA, J. WU, M. KHARICHA, A.
    • Year: 2024
    • Source: Metallurgical and Materials Transactions B

  • Comment on “Numerical study with OpenFOAM on heat conduction problems in heterogeneous media” by K. Zhang, C.-A. Wang, J.-Y. Tan, International Journal of Heat and Mass Transfer, Vol. 124 (2018) 1156–1162

    • Authors: BOHÁČEK, J. MRÁZ, K. HVOŽĎA, J. LANG, F. KARIMI-SIBAKI, E. VAKHRUSHEV, A. KHARICHA, A.
    • Year: 2024
    • Source: International Journal of Heat and Mass Transfer Volume 227, 1 August 2024, 125603

  • Comparative Evaluation of Membrane Contactor and Stripping Device for Ammonia Separation

    • Authors: LINDOVSKÝ, J. MAYEROVÁ, K. KALIVODA, J. KRIŠTOF, O.
    • Year: 2024
    • Source: Proceedings of the 5th International Conference on Fluid Flow and Thermal Science

  • Crossflow polymeric hollow fiber heat exchanger: fiber tension effects on heat transfer and airside pressure drop

    • Authors: KROULÍKOVÁ, T. MRÁZ, K. HVOŽĎA, J. BOHÁČEK, J.
    • Year: 2024
    • Source: Journal of Thermal Analysis and Calorimetry Volume 149, pages 3155–3164, (2024)

  • Determination of transient heat transfer by cooling channel in high-pressure die casting using inverse method

    • Authors: BOHÁČEK, J. MRÁZ, K. HVOŽĎA, J. LANG, F. RAUDENSKÝ, M. VAKHRUSHEV, A. KARIMI-SIBAKI, E. KHARICHA, A.
    • Year: 2024
    • Source: Journal of Physics: Conference Series , Volume 2766 , 9th European Thermal Sciences Conference (Eurotherm 2024) 10/06/2024 - 13/06/2024 Lake Bled, Slovinsko

  • Effects of the asymmetric and oscillating turbulent melt flow on the heat transfer and solidification inside the thin slab continuous casting (TSC) mold under the applied electromagnetic brake (EMBr)

    • Authors: VAKHRUSHEV, A. KARIMI-SIBAKI, E. WU, M. TANG, Y. HACKL, G. WATZINGER, J. BOHÁČEK, J. KHARICHA, A.
    • Year: 2024
    • Source: A Vakhrushev et al 2024 J. Phys.: Conf. Ser. 2766 012196

  • Innovative Oil Cooling Solutions: Polymeric Hollow Fiber Heat Exchanger

    • Authors: LANG, F. BARTULI, E. HVOŽĎA, J. KROULÍKOVÁ, T. BERAN, M. KUČERA, J.
    • Year: 2024
    • Source: Proceedings of the 5th International Conference on Fluid Flow and Thermal Science (ICFFTS 2024)

  • Spiral Structure of Cylindrical Batteries and its Importance in Modeling of Heat Transfer

    • Authors: HVOŽĎA, J. BOHÁČEK, J. VAKHRUSHEV, A. KARIMI-SIBAKI, E.
    • Year: 2024
    • Source: Proceedings of the 5th International Conference on Fluid Flow and Thermal Science (ICFFTS 2024)

  • Thermal performance of shell-and-tube polymeric hollow fiber heat exchangers as oil coolers

    • Authors: ASTROUSKI, I. KŮDELOVÁ, T. BARTULI, E.
    • Year: 2024
    • Source: Case Studies in Thermal Engineering Volume 63, November 2024, 105329

  • Experimental and Numerical Investigations into Heat Transfer Using a Jet Cooler in High-Pressure Die Casting

    • Authors: BOHÁČEK, J.; MRÁZ, K.; KRUTIŠ, V.; KAŇA, V.; VAKHRUSHEV, A.; KARIMI-SIBAKI, E.; KHARICHA, A.
    • Year: 2023
    • Source: Journal of Manufacturing and Materials Processing

  • Impact of Submerged Entry Nozzle (SEN) Immersion Depth on Meniscus Flow in Continuous Casting Mold under Electromagnetic Brake (EMBr)

    • Authors: VAKHRUSHEV, A.; KARIMI-SIBAKI, E.; BOHÁČEK, J.; WU, M.; LUDWIG, A.; TANG, Y.; HACKL, G.; NITZL, G.; WATZINGER, J.; KHARICHA, A.
    • Year: 2023
    • Source: Metals

  • Polymeric hollow fibers serving as a cross-flowheat exchanger in liquid-to-gas applications

    • Authors: HVOŽĎA, J.; BARTULI, E.; RAUDENSKÝ, M.
    • Year: 2023
    • Source: Proceedings of the Thermal and Fluids Engineering Summer Conference

  • Numerical simulation of fluid flow in heat exchangers with complex geometry

    • Authors: MRÁZ, K.; BOHÁČEK, J.; RAUDENSKÝ, M.
    • Year: 2023
    • Source: Proceedings of the Thermal and Fluids Engineering Summer Conference

  • The Efficient Way to Design Cooling Sections for Heat Treatment of Long Steel Products

    • Authors: KOTRBÁČEK, P.; CHABIČOVSKÝ, M.; RESL, O.; KOMÍNEK, J.; LUKS, T.
    • Year: 2023
    • Source: Materials

  • Polymer Hollow Fiber Oil Cooler for a Racing Car

    • Authors: LANG, F.
    • Year: 2023
    • Source: 10th International Conference on Fluid Flow, Heat and Mass Transfer

  • Polymeric Hollow Fiber Heat Exchangers for Automotive Applications

    • Authors: BARTULI, E.; BOHÁČEK, J.; MRÁZ, K.; HVOŽĎA, J.
    • Year: 2023
    • Source: 10th International Conference on Fluid Flow, Heat and Mass Transfer

  • Transient Simulation of Diffusion-Limited Electrodeposition Using Volume of Fluid (VOF) Method

    • Authors: KARIMI-SIBAKI, E.; VAKHRUSHEV, A.; WU, M.; LUDWIG, A.; BOHÁČEK, J.; KHARICHA, A.
    • Year: 2023
    • Source: JOURNAL OF THE ELECTROCHEMICAL SOCIETY

  • Polymeric hollow fibers heat exchangers and their potential application in automotive industry

    • Authors: KUČERA, J.; HVOŽĎA, J.; BARTULI, E.; RAUDENSKÝ, M.
    • Year: 2023
    • Source: KOKA 2023

  • A multiphase model for exploring electrochemical Marangoni flow

    • Authors: KARIMI-SIBAKI, E.; VAKHRUSHEV, A.; WU, M.; LUDWIG, A.; BOHÁČEK, J.; KHARICHA, A.; KADYLNYKOVA, A.
    • Year: 2023
    • Source: ELECTROCHEMISTRY COMMUNICATIONS

  • Polymeric hollow fiber heat transfer surface for heat exchanger

    • Authors: KOLČAVOVÁ SIRKOVÁ, B.; JEŽÍK, K.; SATERNÍK, F.; BARTULI, E.; HVOŽĎA, J.; RAUDENSKÝ, M.
    • Year: 2023
    • Source: Applied Thermal Engineering

  • The Effect of Water Jet Overlaps in a Descaler on the Quality of Surface of the Hot Rolled Steel

    • Authors: POHANKA, M.; VOTAVOVÁ, H.; RESL, O.; KOTRBÁČEK, P.
    • Year: 2023
    • Source: Metals

  • Shear Strength of Adhesive Bonding of Plastics Intended for High Temperature Plastic Radiators

    • Authors: ASTROUSKI, I.; KŮDELOVÁ, T.; KALIVODA, J.; RAUDENSKÝ, M.
    • Year: 2022
    • Source: Processes, 2022, vol. 10, no. 5, p. 1-15. ISSN: 2227-9717.

  • Temperature-dependent burst failure of polymeric hollow fibers used in heat exchangers

    • Authors: BULEJKO, P.; BARTULI, E.; KŮDELOVÁ, T.; VANČURA, J.
    • Year: 2022
    • Source: ENGINEERING FAILURE ANALYSIS, 2022, vol. 131, no. 105895, p. 1-16. ISSN: 1350-6307

  • Ultrafine wet grinding of corundum in the presence of triethanolamine

    • Authors: BULEJKO, P.; ŠULEKOVÁ, N.; VLASÁK, J.; TUUNILA, R.; KINNARINEN, T.; SVĚRÁK, T.; HÄKKINEN, A
    • Year: 2022
    • Source: POWDER TECHNOLOGY, 2022, vol. 395, no. 1, p. 556–561. ISSN: 0032-5910

  • Fully polymeric distillation unit based on polypropylene hollow fiber membranes: thermal performance analysis

    • Authors: HVOŽĎA, J.; STRUNGA, A.; KŮDELOVÁ, T.
    • Year: 2022
    • Source: ENGINEERING MECHANICS 2022

  • Liquid cooling of LED car headlamps using polymeric hollow fibers

    • Authors: MRÁZ, K.; KROULÍKOVÁ, T.; RESL, O.
    • Year: 2022
    • Source: ENGINEERING MECHANICS 2022

  • Numerical modeling and experimental validation of the effect of arc distribution on the as-solidified Ti64 ingot in vacuum arc remelting (VAR) process

    • Authors: KARIMI-SIBAKI, E.; KHARICHA, A.; ABDI, M.; LUDWIG, A.; BOHÁČEK, J.; VAKHRUSHEV, A.; PREISS, B.; WU, M
    • Year: 2022
    • Source: Journal of Materials Research and Technology

  • Heat transfer surfaces made of polymeric hollow fibers – features and utilization

    • Authors: RAUDENSKÝ, M.; KŮDELOVÁ, T.; BARTULI, E.
    • Year: 2022
    • Source: Proceedings of the Thermal and Fluids Engineering Summer Conference

  • Polymeric Hollow Fiber Heat Exchangers in Higher Temperatures

    • Authors: KROULÍKOVÁ, T.; BARTULI, E.; KŮDELOVÁ, T.
    • Year: 2022
    • Source: 9th International Conference on Fluid Flow

  • Influence of Porous Oxide Layer on Water Spray Cooling

    • Authors: RESL, O.; CHABIČOVSKÝ, M.; HNÍZDIL, M.; KOTRBÁČEK, P.; RAUDENSKÝ, M.
    • Year: 2022
    • Source: 9th International Conference on Fluid Flow

  • On modelling conjugated heat transfer in the thin slab CC mold and solid shell formation under the applied EMBr

    • Authors: VAKHRUSHEV, A.; KARIMI-SIBAKI, E.; WU, M.; LUDWIG, A.; NITZL, G.; TANG, Y.; HACKL, G.; WATZINGER, J.; BOHÁČEK, J.; KHARICHA, A.
    • Year: 2022
    • Source: IOP Conference Series: Materials Science and Engineering

  • Computational Simulations of Spray Cooling with Air-Assist Injectors

    • Authors: GREENLEE, B.; LEE, T.; BELLEROVÁ, H.; RAUDENSKÝ, M.
    • Year: 2022
    • Source: Heat Transfer Engineering

  • Heat losses of bloom in the hot rolling process

    • Authors: BELLEROVÁ, H.; POHANKA, M.; RESL, O.
    • Year: 2022
    • Source: Metal 2022

  • Polymeric hollow fibers: a modular heat exchanger for thermal management systems of battery modules in electric vehicles

    • Authors: BOHÁČEK, J.; HVOŽĎA, J.; MRÁZ, K.; VAKHRUSHEV, A.; KARIMI-SIBAKI, E.
    • Year: 2022
    • Source: Experimental Fluid Mechanics 2021

  • Cooling of flue gas by cascade of polymeric hollow fiber heat exchangers

    • Authors: RAUDENSKÝ, M.; KŮDELOVÁ, T.; BARTULI, E.; KROULÍKOVÁ, T.; ASTROUSKI, I.
    • Year: 2022
    • Source: Thermal Engineering

  • Numerical Computation of Anisotropic Thermal Conductivity in Injection Molded Polymer Heat Sink Filled with Graphite Flakes

    • Authors: BRACHNA, R.; KOMÍNEK, J.; GUZEJ, M.; KOTRBÁČEK, P.; ZACHAR, M.
    • Year: 2022
    • Source: Polymers

  • Energy-efficient Systems for Cooling Hot Surfaces and Hydraulic Removal of Scale

    • Authors: KOTRBÁČEK, P.; POHANKA, M.; CHABIČOVSKÝ, M.
    • Year: 2022
    • Source: Hutnické listy

  • Methods for the behaviour analysis of continuous flat water jet structures

    • Authors: ZELEŇÁK, M.; ŘÍHA, Z.; VOTAVOVÁ, H.; FOLDYNA, J.; SITEK, L.; ŠČUČKA, J.; POHANKA, M.
    • Year: 2022
    • Source: International Measurement Confederation

  • Comparison of heat exchanger channels of different geometries at thermal management of flat elements

    • Authors: HVOŽĎA, J.; BARTULI, E.; BOHÁČEK, J.
    • Year: 2022
    • Source: Energie z biomasy XXII

  • Increasing heat flux in a polymer hollow fibre heat exchanger using a Python program

    • Authors: LANG, F.; BARTULI, E.; HVOŽĎA, J.
    • Year: 2022
    • Source: Energie z biomasy XXII

  • Experimental determination of the heat transfer coefficients of shell-and-tube heat exchangers with different hollow fiber arrangements

    • Authors: STRUNGA, A.; KROULÍKOVÁ, T.; BARTULI, E.; RAUDENSKÝ, M.
    • Year: 2022
    • Source: Journal of Thermal Analysis and Calorimetry

  • Nozzle orientation effect on thermal crown and stress in the work roll

    • Authors: POHANKA, M.; RESL, O.
    • Year: 2022

  • Influence of water temperature on spray cooling at high surface temperatures

    • Authors: KOTRBÁČEK, P.; CHABIČOVSKÝ, M.; KOMÍNEK, J.; RESL, O.; BELLEROVÁ, H.
    • Year: 2022
    • Source: Applied Thermal Engineering

  • The analysis of the rolls cooling at push bench in rolling mill plant ŽP A.S.

    • Authors: KÁN, M.; TURŇA, J.; MOJŽÍŠ, M.; PATIN, L.; KOTRBÁČEK, P.; BELLEROVÁ, H.
    • Year: 2022
    • Source: Journal of Metallic Materials

  • Experimental and numerical investigations of arc plasma expansion in an industrial vacuum arc remelting (VAR) process

    • Authors: KARIMI-SIBAKI, E.; LUDWIG, A.; BOHÁČEK, J.; KHARICHA, A.; VAKHRUSHEV, A.; PEYHA, M.; WU, M., PREISS, B.
    • Year: 2022
    • Source: Scientific Reports

  • Limits and Use of Polymeric Hollow Fibers as Material for Heat Transfer Surfaces

    • Authors: KŮDELOVÁ, T.; RAUDENSKÝ, M.; BARTULI, E.
    • Year: 2022
    • Source: 2022 International Congress on Advanced Materials Sciences and Engineering

  • Design of cooling sections for heat treatment based on laboratory measurements of heat transfer coefficient

    • Authors: KOTRBÁČEK, P.; POHANKA, M.; CHABIČOVSKÝ, M.
    • Year: 2022
    • Source: National Conference on Heat Treatment

  • Shell-and-tube polymeric hollow fiber heat exchangers with parallel and crossed fibers

    • Authors: Bartuli, E.; Kůdelová, T.; Raudenský, M.
    • Year: 2021
    • Source: Applied Thermal Engineering, 2021, vol. 182, no. 1, p. 1-7. ISSN: 1359-4311.

  • Investigation of effect of electrode polarity on electrochemistry and magnetohydrodynamics using tertiary current distribution in electroslag remelting process

    • Authors: KARIMI-SIBAKI, E.; KHARICHA, A.; VAKHRUSHEV, D.; WU, M.; LUDWIG, A.; BOHÁČEK, J.
    • Year: 2021
    • Source: JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2021, vol. 28, no. 12, p. 1551–⁠1561. ISSN: 1006-706X.

  • Case study of liquid cooling of automotive headlights with hollow fiber heat exchanger

    • Authors: MRÁZ, K.; BARTULI, E.; KROULÍKOVÁ, T.; ASTROUSKI, I.; RESL, O.; VANČURA, J.; KŮDELOVÁ, T.
    • Year: 2021
    • Source: Case Studies in Thermal Engineering, 2021, vol. 28, no. 12, p. 101689–⁠101689. ISSN: 2214-157X.

  • SEQUENTIAL INVERSE HEAT CONDUCTION PROBLEM IN OPENFOAM

    • Authors: BOHÁČEK, J.; KOMÍNEK, J.; KARIMI-SIBAKI, E.; LEE, T.; VAKHRUSHEV, A.
    • Year: 2021
    • Source: Open FOAM Journal, 2021, vol. 1, no. 1, p. 27–⁠46. ISSN: 2753-8168.

  • Intensification of the secondary cooling by the presence of the oxide layer on the steel slab surface

    • Authors: CHABIČOVSKÝ, M.; RESL, O.; KOTRBÁČEK, P.; RAUDENSKÝ, M.
    • Year: 2021
    • Source: Italy: Associazione Italiana di Metallurgia, 2021. p. 1-8. ISBN: 978-88-98990-24-5.

  • HEAT TRANSFER COEFFICIENT DURING SPRAY COOLING OF VERY HOT SURFACES BY FLAT NOZZLES

    • Authors: BELLEROVÁ, H.; LUKS, T.; RAUDENSKÝ, M.; RESL, O.
    • Year: 2021
    • Source: Italy: Associazione Italiana di Metallurgia, 2021. p. 1-10. ISBN: 978-88-98990-24-5.

  • Influence of the remaining water layer on the cooling of moving steel surfaces

    • Authors: RESL, O.; POHANKA, M.
    • Year: 2021
    • Source: Metal. 28th International Conference on Metallurgy and Materials. Tanger, 2021. p. 288-293. ISBN: 978-80-87294-99-4. ISSN: 2694-9296.

  • Thermal conductivity of porous oxide layer: A numerical model based on CT data

    • Authors: MRÁZ, K.; BOHÁČEK, J.; RESL, O.; CHABIČOVSKÝ, M.; KARIMI-SIBAKI, E.
    • Year: 2021
    • Source: Materials Today Communications, 2021, vol. 28, no. 102705, p. 102705-102705. ISSN: 2352-4928.

  • On Modelling Parasitic Solidification Due to Heat Loss at Submerged Entry Nozzle Region of Continuous Casting Mold

    • Authors: VAKHRUSHEV, A.; KHARICHA, A.; WU, M.; LUDWIG, A.; TANG, Y.; HACKL, G.; NITZL, G.; WATZINGER, J.; BOHÁČEK, J.
    • Year: 2021
    • Source: Metals, 2021, vol. 11, no. 9, p. 1-20. ISSN: 2075-4701.

  • Influence of Segmented Rolls on Homogeneity of Cooling in Continuous Casting

    • Authors: KOMÍNEK, J.; LUKS, T.; POHANKA, M.; HWANG, J. Y.
    • Year: 2021
    • Source: Metals, 2021, vol. 11, no. 8, p. 1-11. ISSN: 2075-4701.

  • A Numerical Study on the Influence of an Axial Magnetic Field (AMF) on Vacuum Arc Remelting (VAR) Process

    • Authors: KARIMI-SIBAKI, E.; KHARICHA, A.; ABDI, M.; VAKHRUSHEV, A.; WU, M.; LUDWIG, A.; BOHÁČEK, J.
    • Year: 2021
    • Source: METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2021, vol. 52, no. 3, p. 1-9. ISSN: 1073-5615.

  • Remote Cooling of Rolls in Hot Rolling; Applicability to Other Processes

    • Authors: BOHÁČEK, J.; RAUDENSKÝ, M.; KOTRBÁČEK, P.
    • Year: 2021
    • Source: Metals, 2021, vol. 11, no. 7, p. 1-7. ISSN: 2075-4701.

  • An Assessment on Average Pressure Drop and Dust-Holding Capacity of Hollow-Fiber Membranes in Air Filtration

    • Authors: BULEJKO, P.; KRIŠTOF, O.; DOHNAL, M.
    • Year: 2021
    • Source: Membranes, 2021, vol. 11, no. 7, p. 467-482. ISSN: 2077-0375.

  • Heat Exchanger for Air-Liquid Application with Chaotised Polymeric Hollow Fibres

    • Authors: KROULÍKOVÁ, T.; ASTROUSKI, I.; RAUDENSKÝ, M.; KŮDELOVÁ, T.
    • Year: 2021
    • Source: Applied Thermal Engineering, 2021, vol. 197, no. October 2021, p. 1-9. ISSN: 1359-4311.

  • Influence of Ambient Temperature on Radiative and Convective Heat Dissipation Ratio in Polymer Heat Sinks

    • Authors: KOMÍNEK, J.; ZACHAR, M.; GUZEJ, M.; BARTULI, E.; KOTRBÁČEK, P.
    • Year: 2021
    • Source: Polymers, 2021, vol. 13, no. 14, p. 1-12. ISSN: 2073-4360.

  • An analysis on energy demands in airborne particulate matter filtration using hollow-fiber membranes

    • Authors: BULEJKO, P.
    • Year: 2021
    • Source: Energy Reports, 2021, vol. 7, no. 7, p. 2727-2736. ISSN: 2352-4847.

  • Reconstructive Mapping from Sparsely-Sampled Groundwater Data Using Compressive Sensing

    • Authors: LEE, T.; LEE, J.; PARK, J.; BELLEROVÁ, H.; RAUDENSKÝ, M.
    • Year: 2021
    • Source: International Journal of Geographical Information Systems, 2021, vol. 13, no. 3, p. 287-301. ISSN: 0269-3798.

  • Hydrodynamically enhanced electrochemical mass transfer on the surface of an electrically conductive droplet

    • Authors: KHARICHA, A.; KARIMI-SIBAKI, E.; VAKHRUSHEV, A.; LUDWIG, A.; BOHÁČEK, J.; WU, M.
    • Year: 2021
    • Source: HEAT AND MASS TRANSFER, 2021, vol. 57, no. 7, p. 1-9. ISSN: 0947-7411.

  • An optimal design for hollow fiber heat exchanger: A combined numerical and experimental investigation

    • Authors: BOHÁČEK, J.; RAUDENSKÝ, M.; ASTROUSKI, I.; KARIMI-SIBAKI, E.
    • Year: 2021
    • Source: Energy, 2021, vol. 229, no. 120571, p. 1-14. ISSN: 0360-5442.

  • Importance of Melt Flow Direction during Injection Molding on Polymer Heat Sinks’ Cooling Efficiency

    • Authors: GUZEJ, M.; ZACHAR, M.; KOMÍNEK, J.; KOTRBÁČEK, P.; BRACHNA, R.
    • Year: 2021
    • Source: Polymers, 2021, vol. 13, no. 8, p. 1-13. ISSN: 2073-4360.

  • Comparison of a Novel Polymeric Hollow Fiber Heat Exchanger and a Commercially Available Metal Automotive Radiator

    • Authors: KROULÍKOVÁ, T.; KŮDELOVÁ, T.; BARTULI, E.; VANČURA, J.; ASTROUSKI, I.
    • Year: 2021
    • Source: Polymers, 2021, vol. 13, no. 7, p. 1-13. ISSN: 2073-4360.

  • Computational simulations of liquid sprays in crossflows with an algorithmic module for primary atomization

    • Authors: LEE, T.; PARK, J.; BELLEROVÁ, H.; RAUDENSKÝ, M.; GREENLEE, B.
    • Year: 2021
    • Source: JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2021, vol. 143, no. 6, p. 061020-061020. ISSN: 0742-4795.

  • Fully Polymeric Distillation Unit Based on Polypropylene Hollow Fibers

    • Authors: KŮDELOVÁ, T.; BARTULI, E.; STRUNGA, A.; HVOŽĎA, J.; DOHNAL, M.
    • Year: 2021
    • Source: Polymers, 2021, vol. 13, no. 7, p. 1031-1031. ISSN: 2073-4360.

  • Shell-and-tube polymeric hollow fiber heat exchangers with parallel and crossed fibers

    • Authors: BARTULI, E.; KŮDELOVÁ, T.; RAUDENSKÝ, M.
    • Year: 2021
    • Source: Applied Thermal Engineering, 2021, vol. 182, no. 1, p. 1-7. ISSN: 1359-4311.

  • A Numerical Investigation on the Electrochemical Behavior of CaO and Al2O3 in the ESR Slags

    • Authors: Karimi-Sibaki, E.; Kharicha, A.; WU, M.; Ludwig,A.; Boháček, J.
    • Year: 2020
    • Source: Metallurgical And Materials Transactions B-Process Metallurgy And Materials Processing Science, 2020, roč. 51, č. 3, s. 871-879. ISSN: 1073-5615.

  • Heat Transfer Correlations for Secondary Cooling in Continuous Casting

    • Authors: Kotrbáček, P.; Bellerová, H.; Luks, T.; Raudenský, M.
    • Year: 2020
    • Source: STEEL RESEARCH INTERNATIONAL, 2020, vol. 11, no. 1, p. 1-8. ISSN: 1611-3683.

  • Spray cooling heat transfer above leidenfrost temperature

    • Authors: Chabičovský, M.; Kotrbáček, P.; Bellerová, H.; Komínek, J.; Raudenský, M.
    • Year: 2020
    • Source: Metals, 2020, vol. 10, no. 9, p. 1-16. ISSN: 2075-4701.

  • A computational protocol forsimulation of liquid jets in crossflows with atomization

    • Authors: Lee, T.-W.; Greenlee, B.; Park,J. E.; Bellerová, H.; Raudenský, M.
    • Year: 2020
    • Source: Atomization and sprays, 2020, vol. 30, no. 5, p. 319-330. ISSN: 1936-2684.

  • Experimental and modeling study on fouling of hollow-fiber membranes by fine dust aerosol particles.

    • Authors: Bulejko, P.; Krištof, O.; Svěrák, T.
    • Year: 2020
    • Source: JOURNAL OF MEMBRANE SCIENCE, 2020, vol. 616, no. 118562, p. 1-10. ISSN: 0376-7388.

  • Energy-efficient cooling and hydraulic descaling systems

    • Authors: Pohanka, M.; Kotrbáček, P.; Bartuli, E.; Raudenský, M.
    • Year: 2020
    • Source: METALLURGIST, 2020, vol. 64, no. 7-8, p. 729-740. ISSN: 0026-0894.

  • Fouling of Polymeric Hollow Fiber Heat Exchangers by Air Dus

    • Authors: Astrouski, I.; Raudenský, M.; Kůdelová, T.; Kroulíková, T.
    • Year: 2020
    • Source: Materials, 2020, vol. 13, no. 21, p. 1-12. ISSN: 1996-1944.

  • Prediction of Leidenfrost Temperature in Spray Cooling for Continuous Casting and Heat Treatment Processes.

    • Authors: Hnízdil, M.; Komínek, J.; Lee, T.; Raudenský, M.; Čarnogurská, M.; Chabičovský, M.
    • Year: 2020
    • Source: Metals, 2020, vol. 10, no. 11, p. 1-12. ISSN: 2075-4701.

  • The Influence of the Fibres Arrangement on Heat Transfer and Pressure Drop of Polumeric Hollow Fibre Heat Exchangers

    • Authors: Kůdelová, T.; Kroulíková, T.; Astrouski, I.; Raudenský, M.
    • Year: 2020
    • Source: Acta Polytechnica, 2020, roč. 60, č. 2, s. 122-126. ISSN: 1210-2709.

  • Air-side pressure drop of polymeric hollow fibre heat exchangers.

    • Authors: Kroulíková, T.; Astrouski, I.; Kůdelová, T.
    • Year: 2020
    • Source: Acta Mechanica Slovaca, 2020, roč. 24, č. 2, s. 14-18. ISSN: 1335-2393.

  • Conditions and characteristics of droplets breakup for industrial waste-derived fuel suspensions ignited in high-temperature air

    • Authors: Glushkov, d.o.; Feoktistov, D.V.; Kuznetsov, G.V.; Batischeva, K.A.; Kůdelová, T.; Paushkina, K.K.
    • Year: 2020
    • Source: FUEL, 2020, roč. 265, č. 1, s. 1-13. ISSN: 0016-2361.

  • Chaotised Polymeric Hollow Fibre Bundle as a Crossflow Heat Exchanger in Air-Water Application

    • Authors: Kroulíková, T.; Astrouski, I.; Raudenský, M;
    • Year: 2020
    • Source: Acta Polytechnica, 2020, 60, 4, p. 318-323. ISSN: 1210-2709.

  • Efficient computational modelling of low loaded bearings of turbocharger rotors

    • Authors: NOVOTNÝ, P.; HRABOVSKÝ, J.
    • Year: 2020
    • Source: INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2020, vol. 174, no. 2020, p. 374-383. ISSN: 0020-7403.

  • Heat treatment of thin sheets, research methodology to design a cooling system

    • Authors: HNÍZDIL, M.; CHABIČOVSKÝ, M.; KOMÍNEK, J.
    • Year: 2020
    • Source: 28th International Conference on Metallurgy and Materials, 2020, vol. 2020, no. 1, p. 258-264. ISSN: 2694-9296.

  • OPTIMAL HYDRAULIC DESCALING

    • Authors: POHANKA, M.; KOTRBÁČEK, P.; RESL, O.; BELLEROVÁ, H.
    • Year: 2020
    • Source: Metal 2020. 2020. p. 118-125. ISBN: 978-80-87294-97-0.

  • Dynamic characteristics of water spreading over laser-textured aluminum alloy surfaces

    • Authors: RAUDENSKÝ, M.; BARTULI, E.; KUZNETSOV, G.V.; FEOKTISTOV, D.V.; ORLOVA, E.G.; ZYKOV, I.Y.; ZHUIKOV, A.V.
    • Year: 2020
    • Source: Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2020, vol. 603, no. 125253, p. 1-11. ISSN: 0927-7757.

  • Improving the thrust bearing performance of turbocharger rotors using optimization methods and virtual prototypes

    • Authors: NOVOTNÝ, P.; HRABOVSKÝ, J.; KLÍMA, J.; HORT, V.
    • Year: 2020
    • Source: 12th International Conference on Vibrations in Rotating Machinery. 1st Edition. London: CRC Press, 2020. p. 100-111. ISBN: 9781003132639.

  • Fouling of Polymeric Hollow Fiber Heat Exchangers by Air Dust

    • Authors: ASTROUSKI, I.; RAUDENSKÝ, M.; KŮDELOVÁ, T.; KROULÍKOVÁ, T.
    • Year: 2020
    • Source: Materials, 2020, vol. 13, no. 21, p. 1-12. ISSN: 1996-1944.

  • Pressure drop study of polymeric hollow fiber heat exchangers

    • Authors: KROULÍKOVÁ, T.; ASTROUSKI, I.; KŮDELOVÁ, T.
    • Year: 2020
    • Source: Proceedings of the Engineering Mechnics 2020. p. 314-317. ISBN: 978-80-214-5896-3. ISSN: 1805-8248.

  • THERMAL PROPERTIES OF CARDIOPLEGIA HEAT EXCHANGERS

    • Authors: BARTULI, E.; BORKOVEC, O.
    • Year: 2020
    • Source: ENGINEERING MECHANICS 2020. p. 82-85. ISBN: 978-80-214-5896-3. ISSN: 1805-8248.

  • Potential use of blast furnace slag for filtration membranes preparation: A pilot study

    • Authors: Bílek Jr., V.; Bulejko, P.; Kejík, P.; Hajzler, J.; Másilko, J.; Bednárek, J.; Tkacz, J.; Kalina, L.
    • Year: 2019
    • Source: International Conference Building Materials, Products and Technologies. IOP Conference Series: Materials Science and Engineering. Bristol: IOP Publishing, 2018. p. 1-6. ISSN: 1757-899X

  • Mass Production and Applications of Polymeric Hollow-Fibers Heat Exchangers

    • Authors: Raudenský, M.; Tseng, A.A.
    • Year: 2019
    • Source: SF Journal of Material and Chemical Engineering, 2019, vol. 2, no. 1, p. 1-7. ISSN: 2643-8100

  • Energeticky úsporné systémy pro chlazení horkých povrchů a hydraulické odstranění okují

    • Authors: Kotrbáček, P.; Pohanka, M.; Zachar, M.; Beran, P.; Charvát, L.;
    • Year: 2019
    • Source: Hutnické listy č. 4/2019, roč. LXXII, s. 15-22, ISSN 0018-8069

  • The Influence of the Structure of Heat Transfer Surfaces on Polymeric Hollow Fibre Heat Exchangeres.

    • Authors: Brožová, T.; Astrouski, I.; Raudenský, M.
    • Year: 2019
    • Source: ERIN 2019.1. Brno: 2019, s.14-14. ISBN: 978-80-214-5733-1

  • Chaotised polymeric hollow fiber bundle as a crossflow heat exchanger in air-water application

    • Authors: Kroulíková, T.; Astrouski, I.; Raudenský, M.
    • Year: 2019
    • Source: ERIN 2019. Brno: 2019. p. 26. ISBN: 978-80-214-5733-1

  • Variations in anion-exchange membrane properties with ionic resin moisture

    • Authors: Bulejko, P.; Stránská, E.
    • Year: 2019
    • Source: IONICS, 2019, vol. 25, no. 9, p. 4251-4263. ISSN: 0947-7047

  • Přečištění vzdušiny pomocí zařízení scrubber

    • Authors: Vlasák, J.; Svěrák, T.; Kalivoda, J.
    • Year: 2019
    • Source: Sborník příspěvků konference Junior Forensic Science Brno 2019. Brno: Vysoké učení technické v Brně, Ústav soudního inženýrství, Purkyňova 464/118, 612 00, 2019. ISBN: 978-80-214-5730-0

  • Experimental Verification of Polymeric Distillation Unit

    • Authors: Kroulíková, T.; Brožová, T.; Bartuli, E.; Raudenský, M.
    • Year: 2019
    • Source: Engineering Mechanics 2019 Book of Full Texts. Praha: Institute of Thermomechanics of the Czech Academy of Sciences, 2019. s. 211-214. ISBN: 978-80-87012-71-0.

  • CFD Simulation of Defogging Effectivity in Automotive Headlamp

    • Authors: Guzej, M.; Zachar, M.;
    • Year: 2019
    • Source: Energies, 2019, vol. 12, no. 13, p. 1-18. ISSN: 1996-1073

  • Polymeric hollow fiber heat exchangers

    • Authors: Raudenský, M.
    • Year: 2019
    • Source: AIP Conference Proceedings 2118, 020002 (2019); https://doi.org/10.1063/1.5114727, Published Online: 27 June 2019

  • Effective thrust bearing model for simulations of transient rotor dynamics

    • Authors: Novotný, P.; Hrabovský, J.; Juračka, J.; Klíma, J.; Hort, V.
    • Year: 2019
    • Source: International Journal of Mechanical Sciences, 2019, vol. 157, no. 2019, p. 374-383. ISSN: 0020-7403

  • Factors influencing spray quenching of steel products

    • Authors: Chabičovský, M.; Kotrbáček, M.; Raudenský, M.
    • Year: 2019
    • Source: European conference on Heat treatment, Heat treatment and surface engineering for automotive. Bardolino, Italia, 4.-7.62019. ISBN: 978-88-98990-19-1

  • The Effect of Remaining Water Layer on Final Temperature of Steel Plate During Hot Rolling

    • Authors: Resl, O.; Pohanka, M.
    • Year: 2019
    • Source: Metal, Brno 22.-24.5.2019

  • Study of thermal conductivity of the porous oxide layer

    • Authors: Resl, O.; Chabičovský, M.; Votavová, H.
    • Year: 2019
    • Source: 25th International Conference ENGINEERING MECHANICS 2019 Svratka, Czech Republic, 13 – 16 May 2019

  • Experimental Study on Spray Breakup in Turbulent Atomization Using a Spiral Nozzle

    • Authors: Krištof, O.; Bulejko, P.; Svěrák, T.
    • Year: 2019
    • Source: Processes, 2019, vol. 7, no. 12, p. 1-25. ISSN: 2227-9717

  • Testing of Polymeric Hollow Fibre Heat Exchanger with Crossed Hollow Fibres

    • Authors: Bartuli, E.; Kroulíková, T.
    • Year: 2019
    • Source: Lisbon: 2019. p. HTFF 143-1 (HTFF 143-5 p.)

  • Life Expectancy of Polymeric Hollow Fibre Heat Transfer Surfaces

    • Authors: Brožová, T.; Kroulíková, T.
    • Year: 2019
    • Source: Lisbon: 2019. p. HTFF 128-1 (HTFF 128-6 p.)

  • Optimization of Work Roll Cooling in Rolling

    • Authors: Kotrbáček, P.; Pohanka, M.; Zachar, M.
    • Year: 2019
    • Source: Dusseldorf: 2019. p. 1-6

  • Study of the heat transfer distribution during the plate heat treatment

    • Authors: Kotrbáček, P.; Pohanka, M.; Chabičovský, M.; Raudenský, M.
    • Year: 2019
    • Source: Dusseldorf: 2019. p. 1-5

  • Polymeric Hollow Fiber Heat Transfer Surfaces for Shell and Tube Application

    • Authors: Raudenský, M.; Brožová, T.; Bartuli, E.
    • Year: 2019
    • Source: ASTFE Digital Library. 4th Thermal and Fluids Engineering Conference. 2019. p. 199-204. ISSN: 2379-1748

  • Cooling Efficiency Various Emulsion during Cold Rolling

    • Authors: Hnízdil, M.; Chabičovský, M.; Jacos, L.; Vervaet, B.;
    • Year: 2019
    • Source: Technical contribution to the 11th International Rolling Conference, part of the ABM Week 2019, October 1st-3rd, 2019, Sao Paulo, SP, Brazil, s. 1-9

  • Prototyp kontaktorové stěny pro testování separace amoniaku z fugátu

    • Authors: Kalivoda, J.; Svěrák, T.; Žůrek, M.; Mayerová, K.; Krištof, O.; Bulejko, P.
    • Year: 2019
    • Source: Praha: VŠCHT v Praze, 2019. s. 1 (1 s.).

  • Pressure drop evolution during dust loading of hollow-fiber membranes

    • Authors: Bulejko, P.; Dohnal, M.; Krištof, O.; Svěrák, T.
    • Year: 2019
    • Source: International Conference and Exhibition for Filtration and Separation Technology, Filtech 2019. Kolín n. Rýnem: 2019. p. 1-8. ISBN: 978-3-941655-17-1.

  • Komplexní snížení plynných polutantů „malých“ producentů emisí

    • Authors: Kalivoda, J.; Mayerová, K.; Krištof, O.; Svěrák, T.; Žůrek, M.
    • Year: 2019
    • Source: 2019. s. 1-25

  • Fine/ultrafine particle air filtration and aerosol loading of hollow-fiber membranes: A comparison of mathematical models for the most penetrating particle size and dimensionless permeability with experimental data

    • Authors: Bulejko, P.; Krištof, O.; Dohnal, M.; Svěrák, T.
    • Year: 2019
    • Source: Journal of Membrane Science, 2019, vol. 592, p. 117393. ISSN: 0376-7388

  • A GPU solver for symmetric positive-definite matrices vs. traditional codes.

    • Authors: Boháček, J.; Karimi-Sibaki, E.; Kharicha, A.; Ludwig, A.; Wu, M.; Holzmann, T.
    • Year: 2019
    • Source: Computers and Mathematics with Applications, 2019, vol. 78, no. 9, p. 2933-2943. ISSN: 0898-1221.

  • A Dynamic Mesh Method to Model Shape Change during Electrodeposition

    • Authors: Karimi-Sibaki, E.; Kharicha, A.; Abdi, A.; Wu, M.; Ludwig, A.; Boháček, J.
    • Year: 2019
    • Source: Journal Of The Electrochemical Society, 2019, roč. 166, č. 12, s. D521 (D529 s.)ISSN: 0013-4651.

  • A Parametric Study of the Vacuum Arc Remelting (VAR) Process: Effects of Arc Radius, Side-Arcing, and Gas Cooling

    • Authors: Karimi-Sibaki, E.;Kcharika, A.;WU, M.;Ludwig, A.; Boháček, J.
    • Year: 2019
    • Source: Metallurgical And Materials Transactions B-Process Metallurgy And Materials Processing Science, 2019, roč. 51, č. 1, s. 222-235. ISSN: 1073-5615.

  • Polymeric hollow fibers: A supercompact cooling of Li-ion cells

    • Authors: Boháček, J.; Raudenský, M.; Kroulíková, T.; Karimi-Sibaki, E.
    • Year: 2019
    • Source: International Journal Of Thermal Sciences, 2019, 146, 1, p. 106060. ISSN: 1290-0729.

  • Polymeric hollow fibers: Uniform temperature of Li-ion cells in battery modules

    • Authors: Boháček, J.; Raudenský, M.
    • Year: 2019
    • Source: Applied Thermal Engineering, 2019, 159, p. 113940. ISSN: 1359-4311.

  • Modeling electrochemical transport of ions in the molten CaF2-FeO slag operating under a DC voltage

    • Authors: Karimi-Sibaki, E.; Kharicha, A.; WU, M.; Ludwig, A.; Boháček, J.
    • Year: 2019
    • Source: APPLIED MATHEMATICS AND COMPUTATION, 2019, roč. 357, č. 1, s. 357-373. ISSN: 0096-3003.

  • A volume of fluid (VOF) method to model shape change during

    • Authors: Karimi-Sibaki, E.; Kharicha, A.; Vakhrushev, A.; WU, M.; Ludwig, A.; Boháček, J.
    • Year: 2019
    • Source: ELECTROCHEMISTRY COMMUNICATIONS, 2020, roč. 112, č. 106675, s. 1-7. ISSN: 1388-2481.

  • Additives to Coal-Based Fuel Pellets for the Intensification of Combustion and Reduction in Anthropogenic Gas Emissions

    • Authors: Klepikov, D.; Kůdelová, T.; Paushkina, K.; Strizhak, P.
    • Year: 2019
    • Source: Applied Sciences - Basel, 2020, roč. 10, č. 19, s. 1-18. ISSN: 2076-3417.

  • The effect of initial moisture content of cation-exchange resin on the preparation and properties of heterogeneous cation-exchange membranes

    • Authors: Bulejko, P.; Stránská, E.
    • Year: 2018
    • Source: MATERIALS CHEMISTRY AND PHYSICS, 2018, vol. 205, no. 1, p. 470-479. ISSN: 1879-3312

  • Thermal Performance Study of Polymeric Hollow-Fiber Heat-Exchangers

    • Authors: Tseng, A.A.; Raudenský, M.
    • Year: 2018
    • Source: Heat and Mass Transfer Research Journal Vol. 2, No. 1; 2018 Published by CanSRG

  • Meat Consumption and its Impact on Greenhouse Gas Emissions from Group of Twenty (G20) and the World

    • Authors: Tseng, A.A.; Raudenský, M.
    • Year: 2018
    • Source: Recent Advantages in Food safety, RAdvFoodSci: 2018: 1(1):11-22, ISSN: 2601-5412

  • Air Filtration Using Hollow-Fiber Membranes: A Comparison of Theoretical Models for the Most Penetrating Particle Size and Dimensionless Permeability with Experimental Data

    • Authors: Bulejko, P.; Ondráček, J.; Dohnal, M.
    • Year: 2018
    • Source: AFS Filtcon, April 1-3 2019, Philadelphia-Cherry Hill, USA, 2019. p. 1-11

  • Air filtration using hollow-fibre membranes for nanoparticle removal

    • Authors: Bulejko, P.; Dohnal, M.; Pospíšil, J.; Krištof, O.; Svěrák, T.; Kejík, P.
    • Year: 2018
    • Source: FILTECH 2018, March 13-15, Cologne – Germany. 2018. p. 1-12. ISBN: 978-3-941655-15-7

  • Determination of surface wettability of polymeric hollow fibres

    • Authors: Brožová, T.; Raudenský, M.
    • Year: 2018
    • Source: Journal of elastomers and plastics, 2018, p. 1-10. ISSN: 0095-2443

  • Flexible Polymeric Hollow Fiber Heat Exchangers

    • Authors: Brožová, T.; Raudenský, M.; Astrouski, I.
    • Year: 2018
    • Source: Proceedings of 2nd International Conference on Design and Production Engineering & 2nd International Conference on Mechatronics, Automation and Smart Materials. 2018. p. 1373-1382. ISBN: 978-1-56700-430-4

  • Condensation on the Outer Surface of Polymer Hollow Fiber Heat Exchangers and its Influence to the Heat Transfer

    • Authors: Brožová, T.; Bartuli, E.; Raudenský, M.
    • Year: 2018
    • Source: Engineering Mechanics 2018. Praha: ITAM CAS, 2018. p. 117-120. ISBN: 978-80-86246-88-8

  • The Influence of Hollow Fibers Orientation Inside the Polymeric Hollow Fiber Heat Exchanger on the Heat Transfer Intensity

    • Authors: Bartuli, E.; Brožová, T.; Raudenský, M.
    • Year: 2018
    • Source: Engineering Mechanics 2018. Praha: ITAM CAS, 2018. p. 61-64. ISBN: 978-80-86246-88-8

  • Secondary cooling overlapped with bearing housing in a continuous caster

    • Authors: Komínek, J.; Luks, T.; Pohanka, M.; Raudenský, M.; Hwang, J-Y.
    • Year: 2018
    • Source: Sborník konference METAL 2018. Ostrava: Tanger, Ostrava, 2018. p. 1-6. ISBN: 978-80-87294-83-3

  • Impact of oxide layer on spray cooling intensity and homogeneity during continuous casting of the steel

    • Authors: Chabičovský, M.; Resl, O.; Raudenský, M.
    • Year: 2018
    • Source: Sborník konference METAL 2018. Ostrava: Tanger, Ostrava, 2018. p. 1-6. ISBN: 978-80-87294-83-3

  • The cooling process in spray overlap during hydraulic descaling

    • Authors: Votavová, H.; Pohanka, M.
    • Year: 2018
    • Source: Sborník konference METAL 2018. Ostrava: Tanger, Ostrava, 2018. p. 1-6. ISBN: 978-80-87294-83-3

  • Air filtration performance of symmetric polypropylene hollow-fibre membranes for nanoparticle removal

    • Authors: Bulejko, P.; Dohnal, M.; Pospíšil, J.; Svěrák, T.
    • Year: 2018
    • Source: Separation and purification technology, 2018, vol. 197, no. 1, p. 122-128. ISSN: 1383-5866

  • Numerical Comparison of Prediction Models for Aerosol Filtration Efficiency Applied on a Hollow-Fiber Membrane Pore Structure

    • Authors: Bulejko, P.
    • Year: 2018
    • Source: Nanomaterials, 2018, vol. 8, no. 6, p. 1-24. ISSN: 2079-4991

  • Porous Systems Based on Alkali-Activated Fly Ash

    • Authors: Kejík, P.; Bílek, Jr., V.; Bulejko, P.; Hajzler, J.; Březina, M.; Galvánková, L.; Kalina, L.
    • Year: 2018
    • Source: Binders, Materials and Technologies in Modern Construction IV. Solid State Phenomena. Switzerland: Trans Tech Publications, 2018. p. 179-184. ISBN: 978-3-0357-1348-0. ISSN: 1662-9779

  • Development and plant verification of tube quenching unit

    • Authors: Raudenský, M.; Chabičovský, M.; Turoň, R.
    • Year: 2018
    • Source: The 7th International Congress on Science and Technology of Steelmaking. Milano: Associazione Italiana di metallurgia, 2018. p. 1-8. ISBN: 978-88-98990-14-6

  • Polymeric Hollow-Fiber Bundles as Immersed Heat Exchangers

    • Authors: Weiss, K.; Astrouski, I.; Raudenský, M.; Reppich, M.
    • Year: 2018
    • Source: Chemical Engineering and Technology, 2018, vol. 41, no. 7, p. 1457-1465. ISSN: 1521-4125

  • A Complex Approach for Secondary Cooling Improvements Using Sophisticated Spray Nozzle Analyses in Various ArcelorMittal USA Casters

    • Authors: Moravec, R.; Blazek, K.; Yin, H.; Gregurich, N.; Horský, J.
    • Year: 2018
    • Source: Iron and Steel Technology, 2018, vol. 15, no. 9, p. 44-50. ISSN: 1547-0423

  • Aerosol filtration using hollow-fiber membranes: Effect of permeate velocity and dust amount on separation of submicron TiO2 particles

    • Authors: Bulejko, P.; Svěrák, T.; Dohnal, M.; Pospíšil, J.
    • Year: 2018
    • Source: POWDER TECHNOLOGY, 2018, vol. 340, no. 1, p. 344-353. ISSN: 0032-5910

  • Measurement of cooling effects of nozzles of CCM secondary cooling

    • Authors: Kotrbáček, P.; Luks, T.; Horský, J.
    • Year: 2018
    • Source: Odborná konferencia ŽP VVC 2018 Zborník príspevkov. Brezno: ŽP Výskumno-vývojové centrum s.r.o., 2018. p. 65-70. ISBN: 978-80-973141-0-1

  • Profile roll cooling systems

    • Authors: Kotrbáček, P.; Chabičovský, M.; Horský, J.
    • Year: 2018
    • Source: In Odborná konferencia ŽP VVC 2018 Zborník príspevkov. Brezno: ŽP Výskumno-vývojové centrum s.r.o., 2018. p. 71-76. ISBN: 978-80-973141-0-1

  • Experimental study of in-line heat treatment of 1.0577 structural steel

    • Authors: Hnízdil, M.; Chabičovský, M.
    • Year: 2018
    • Source: 17th International Conference on Metal Forming (METAL FORMING 2018). Procedia Manufacturing. Elsevier, 2018. p. 1696-1603. ISBN: 9781510869561. ISSN: 2351-9789

  • Hydraulic descaling of wire coils during pickling program

    • Authors: Pohanka, M.; Hnízdil, M.; Kotrbáček, P.; Votavová, H.
    • Year: 2018
    • Source: OXI2018, European Oxide Scale Conference, 11-12/DEC/2018. p. 45-48

  • Influence of the oxide layer on the spray cooling intensity

    • Authors: Chabičovský, M.; Resl, O.; Raudenský, M.
    • Year: 2018
    • Source: OXI2018, European Oxide Scale Conference, 11-12/DEC/2018. p. 15-18

  • Aerosol separation efficiency and pressure drop evolution with intense particle loading of hollow-fiber membranes

    • Authors: Bulejko, P.; Svěrák, T.; Krištof, O.; Dohnal, M.; Ondráček, J.
    • Year: 2018
    • Source: 23rd International Congress of Chemical and Process Engineering CHISA 2018 Prague. 2018. p. 1 (1 s.)

  • Approximate Solution to the Spray Heat Transfer Problem at High Surface Temperatures and Liquid Mass Fluxes

    • Authors: Lee, T.; Hnízdil, M.; Chabičovský, M.; Raudenský, M.
    • Year: 2018
    • Source: Heat Transfer Engineering. 2018. p. 1-7. DOI: 10.1080/01457632.2018.1480881

  • Polymeric hollow fiber heat transfer surfaces for shell and tube applicatin

    • Authors: Raudenský, M.; Brožová, T.; Bartuli, E.
    • Year: 2018
    • Source: 4th Thermal and Fluids Engineering Conference (TFEC) April 14–17, 2019 Las Vegas, NV, USA. TFEC-2019-27668, ASFE Digital library.

  • Latest development of hydraulic descaling nozzles

    • Authors: Raudenský, M.;Pohanka, M.; Votavová, H.; Říha, Z.; Zeleňák, M.
    • Year: 2018
    • Source: ICLASS 2018, Chicago: 2018. p. 1-5.

  • A multiphysics model of the electroslag rapid remelting (ESRR) process.

    • Authors: Karimi-Sibaki, E.; Kharicha, A.; Wu, M.; Ludwig, A.; Boháček, J.; Holzgruber, H.; Ofner, B.; Scherlau, A.; Kubin, M.
    • Year: 2018
    • Source: Applied Thermal Engineering, 2018, roč. 130, č. 1, s. 1062-1069. ISSN: 1359-4311.

  • A (non-)hydrostatic free-surface numerical model for two-layer flows.

    • Authors: Boháček, J.; Kharicha, A.; Ludwig, A.; Wu, M.; Karimi-Sibaki, E. Paar, A.; Brander, M.; Elizondo, L.; Trickl, T.
    • Year: 2018
    • Source: Applied Mathematics And Computation, 2018, roč. 319, č. 1, s. 301-317. ISSN: 0096-3003.

  • Heat Transfer Coefficient at Cast-Mold Interface During Centrifugal Casting: Calculation of Air Gap

    • Authors: Boháček, J.; Kharicha, A.; Ludwig, A.; Wu, M.; Karimi-Sibaki, E.
    • Year: 2018
    • Source: Metallurgical And Materials Transactions B-Process Metallurgy And Materials Processing Science, 2018, roč. 49, č. 3, s. 1421-1433. ISSN: 1073-5615

  • Confrontation of the Ohmic approach with the ionic transport approach for modeling the electrical behavior of an electrolyte.

    • Authors: Karimi-Sibaki, E.; Kharicha, E.; Wu, M.; Ludwig, A.; Boháček, J.
    • Year: 2018
    • Source: IONICS, 2018, roč. 24, č. 7, s. 2157-2165. ISSN: 0947-7047.

  • Contribution of an Electro-Vortex Flow to Primary, Secondary, and Tertiary Electric Current Distribution in an Electrolyte.

    • Authors: Karimi-Sibaki, E.; Kharicha, A.; Wu, M.; Ludwig, A.; Boháček, J.
    • Year: 2018
    • Source: JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2018, roč. 165, č. 11, s. E604 (E615 s.)ISSN: 0013-4651.

  • Simulation in metallurgy: Past achievements and future challenges.

    • Authors: Boháček, J.; Koutná, N.; Ludwig, A.; Rodrigues, C.; Karimi-Sibaki, E.; Kharicha, A.
    • Year: 2018
    • Source: In METAL 2018 - sborník z konference. TANGER Ltd. OSTRAVA, CZECH REP.: TANGER LTD, 2018. s. 28-33. ISBN: 978-80-87294-84-0.

  • Review on Modeling and Simulation of Electroslag Remelting

    • Authors: Kharicha, A.; Karimi-Sibaki, E.; Wu, M.; Ludwig, A.; Boháček, J
    • Year: 2018
    • Source: Steel Research International, 2018, roč. 89, č. 1, s. 1-20. ISSN: 1611-3683.

  • Momentum Analyses For Determination Of Drop Size And Distributions During Spray Atomization

    • Authors: Lee, T.-W; Park, J. E.; Bellerová, H.; Raudenský, M.; Hnízdil, M.
    • Year: 2018
    • Source: Metallurgical And Materials Transactions B-Process Metallurgy And Materials Processing Science, 2018, roč. 49, č. 3, s. 1421-1433. ISSN: 1073-5615

  • Properties and structure of heterogeneous ion-exchange membranes after exposure to chemical agents

    • Authors: Bulejko, P.; Stránská, E.; Weinertová, K.
    • Year: 2017
    • Source: Journal of Solid State Electrochemistry, 2017, vol. 21, no. 1, p. 111-124. ISSN: 1432-8488

  • Covering ability of aluminum pigments prepared by milling processes

    • Authors: Svěrák, T.; Bulejko, P.; Krištof, O.; Kalivoda, J.; Horský, J.
    • Year: 2017
    • Source: Powder technology, 2017, vol. 305, no. 1, p. 396-404. ISSN: 0032-5910

  • Health risk assessment of heavy metals bonded to airborne particulate matter

    • Authors: Bulejko, P.; Adamec, V.; Schüllerová, B.; Skeřil, R.
    • Year: 2017
    • Source: Proceedings of 26th International Scientific Conference of Forensic Engineering, Brno, 27th to 28th of January 2017. Brno: 2017. p. 320-326. ISBN: 978-80-214-5459-0

  • Influence of Chemical Additives and Curing Conditions on Mechanical Properties and Carbonation Resistance of Alkali Activated Slag Composites

    • Authors: Bulejko, P.; Bílek, V.
    • Year: 2017
    • Source: Materiali in tehnologije, 2017, vol. 51, no. 1, p. 49-53. ISSN: 1580-2949

  • Intensification of heat transfer of polymeric hollow fiber heat exchangers by chaotisation

    • Authors: Raudenský, M.; Astrouski, I.; Dohnal M.
    • Year: 2017
    • Source: Applied Thermal Engineering, 2017, no. 113, p. 632-638. ISSN: 1359-4311

  • Heat treatment of rails

    • Authors: Hnízdil, M.; Kotrbáček, P.
    • Year: 2017
    • Source: Materiali in tehnologije, 2017, vol. 51, no. 2, p. 329-332. ISSN: 1580-2949

  • Energeticky úsporné systémy pro chlazení horkých povrchů a tepelné zpracování kovů

    • Authors: Kotrbáček, P.; Horský, J.
    • Year: 2017
    • Source: Sborník anotací semináře efektivní energetika XVIII. VŠB-Technická univerzita Ostrava: Ediční středisko VŠB-TU Ostrava, 2017. s. 5-7

  • A complex approach for secondary cooling improvements using sophisticated spray nozzle analyses in various arcelormittal USA Casters

    • Authors: Moravec, R.; Blazek, K.; Yin, H.; Gregurich, N.; Horský, J.
    • Year: 2017
    • Source: AISTech 2017 Proceedings. 2017. p. 1735-1742. ISBN: 9781935117643

  • Numerical thermal comparison of heat sink materials for automotive led headlamps

    • Authors: Zachar, M.; Guzej, M.; Horský, J.
    • Year: 2017
    • Source: Engineering mechanics 2017. 2017. p. 1078-1081. ISBN: 978-80-214-5497-2

  • Efficiency of hollow-fiber membranes for air filtration of submicron particles

    • Authors: Bulejko, P.; Dohnal, M.; Pospíšil, J.; Krištof, O.; Kejík, P.; Svěrák, T.
    • Year: 2017
    • Source: 44th International Conference of the Slovak Society of Chemical Engineering. 2017. p. 495-499. ISBN: 978-80-89597-58-1

  • Ceramic membranes based on alkali-activated materials

    • Authors: Bulejko, P.; Bílek, V.
    • Year: 2017
    • Source: 44th International Conference of the Slovak Society of Chemical Engineering. 2017. p. 501-507. ISBN: 978-80-89597-58-1

  • Experimental and CFD investigation of gas and liquid phase in scrubber for absorption processes

    • Authors: Krištof, O.; Svěrák, T.; Bulejko, P.; Kejík, P.; Kalivoda, J.
    • Year: 2017
    • Source: 44th International Conference of the Slovak Society of Chemical Engineering. 2017. p. 448-453. ISBN: 978-80-89597-58-1

  • Effect of The Speed of Feedstock on Heat Transfer Coefficient During Descaling in Hot Rolling

    • Authors: Votavová, H.; Pohanka, M.
    • Year: 2017
    • Source: Sborník konference METAL 2017. Ostrava: Tanger, Ostrava, 2017. p. 261-266. ISBN: 978-80-87294-73-4

  • Factors Influencing Spray Cooling of Hot Steel Surfaces

    • Authors: Chabičovský, M.; Horský, J.
    • Year: 2017
    • Source: Sborník konference METAL 2017. Ostrava: Tanger, Ostrava, 2017. p. 77-83. ISBN: 978-80-87294-79-6

  • Levels and health risk assessment of PM10 aerosol in Brno, Czech Republic

    • Authors: Bulejko, P.; Adamec, V.; Skeřil, R.; Schüllerová, B.; Bencko, V.
    • Year: 2017
    • Source: Central European Journal of Public Health, 2017, vol. 25, no. 2, p. 129-134. ISSN: 1803-1048

  • Electrochemical and mechanical stability of ion-exchange membranes in alkaline solution

    • Authors: Bulejko, P.; Stránská, E.; Weinertová, K.
    • Year: 2017
    • Source: Chemical Papers, 2017, vol. 71, no. 7, p. 1303-1309. ISSN: 1336-9075

  • The effect of water temperature on cooling during high pressure water descaling

    • Authors: Pohanka, M.; Votavová, H.; Raudenský, M.; Hwang, J. Y.; You, J.
    • Year: 2017
    • Source: Thermal Science, 2017, no. 00, p. 163-173. ISSN: 0354-9836

  • Fouling of polymeric hollow fiber heat exchanger by ashrae 52.1 test dust

    • Authors: Astrouski, I.; Raudenský, M.; Dohnal, M.
    • Year: 2017
    • Source: Heat Exchanger Fouling and Cleaning XI - 2017. 2017

  • Wärmeübertrager mit Kunststoffhohlfasern

    • Authors: Astrouski, I.; Brožová, T.; Raudenský, M.; Reppich, M.
    • Year: 2017
    • Source: Kompakt-Wärmeübertrager. Essen, Germany: PP PU, 2017. p. 62-66. ISBN: 978-3-934736-39-9

  • Air purification performance of polypropylene hollow-fibre membranes in submicron particle removal

    • Authors: Bulejko, P.; Dohnal, M.; Pospíšil, J.; Svěrák, T.
    • Year: 2017
    • Source: Proceedings of 18th Annual Conference of the Czech Aerosol Society. Praha: Česká aerosolová společnost, 2017. p. 88-91. ISBN: 978-80-270-2862-7

  • Separation of gaseous air pollutants using membrane contactors

    • Authors: Svěrák, T.; Bulejko, P.; Ostrezi, J.; Krištof, O.; Kalivoda, J.; Kejík, P.; Mayerová, K.; Adamčík, M.
    • Year: 2017
    • Source: IOP Conference Series: Earth and Environmental Science, 2017, vol. 92, no. 1, p. 1-5. ISSN: 1755-1315

  • Flexible heat exchangers with polymeric hollow fibres

    • Authors: Raudenský, M.; Brožová, T.; Bartuli, E.
    • Year: 2017
    • Source: Scientific Tracks and Abstracts. Journal of Applied Mechanical Engineering. Paris, Francie: 2017. p. 31-31. ISSN: 2168-9873

  • Development of the Tube Quenching Prototype Unit in Třinecké Železárny

    • Authors: Hnízdil, M.; Chabičovský, M.; Turoň, R.; Squerzi, M.; Šimeček, P.; Kreisinger, M.
    • Year: 2017
    • Source: 2017. p. 38-39

  • Odstraňování plynných polutantů ze vzdušnin na poloprovozní pračce

    • Authors: Kalivoda, J.
    • Year: 2017
    • Source: Ph.D. thesis, Brno: Vysoké učení technické v Brně, 2017

  • Experimental and numerical study of hot-steel-plate flatness. Materiali in tehnologije

    • Authors: Hrabovský, J.; Pohanka, M.; Lee, P. J.; Kang, J. H.
    • Year: 2016
    • Source: 2016, vol. 50, no. 1, p. 17-21. ISSN: 1580-2949

  • Design of quenching units for heat treatment of tubes

    • Authors: Chabičovský, M.; Horský, J.; Raudenský, M.; Hnízdil, M.; Kotrbáček, P.
    • Year: 2016
    • Source: La Metallurgia Italiana, 2016, vol. 2016, no. 1, p. 23-28. ISSN: 0026-0843

  • Study of Water Jet Collision of High Pressure Flat Jet Nozzles for Hydraulic Descaling

    • Authors: Votavová, H.; Pohanka, M.
    • Year: 2016
    • Source: Engineering Mechanics 2015. Applied Mechanics and Materials. Switzerland: Trans Tech Publications, 2016. p. 152-158. ISBN: 978-3-03835-700-1. ISSN: 1660-9336

  • Fatigue Testing of Polymeric Hollow Fibre Heat Transfer Surfaces by Pulsating Pressure Loads

    • Authors: Brožová, T.; Luks, T.; Astrouski, I.; Raudenský, M.
    • Year: 2016
    • Source: Engineering Mechanics 2015. Applied Mechanics and Materials. Switzerland: Trans Tech Publications, 2016. p. 3-9. ISBN: 978-3-03835-700-1. ISSN: 1660-9336

  • Levels, source apportionment and health risk assessment of polycyclic aromatic hydrocarbons fixed to airborne particulate matter in areas of Brno city

    • Authors: Bulejko, P.; Adamec, V.; Schüllerová, B.; Skeřil, R.
    • Year: 2016
    • Source: Proceeedings of 25th International Scientific Conference of Forensic Engineering Expert Forensic Science 2016, Brno, 29th to 30th of January 2016. Brno: 2016. p. 414-427. ISBN: 978-80-214-5321-0

  • Hiding Power of Aluminum Metal Pigments Development in the Ball Mill Grinding Process

    • Authors: Svěrák, T.; Bulejko, P.; Mayerová, K.; Kejík, P.; Krištof, O.; Raudenský, M.
    • Year: 2016
    • Source: Solid State Phenomena, 2016, vol. 244, no. 1, p. 19-25. ISSN: 1662-9779

  • Implicit numerical multidimensional heat-conduction algorithm parallelization and acceleration on a graphics card

    • Authors: Pohanka, M.; Ondroušková, J.
    • Year: 2016
    • Source: Materiali in tehnologije, 2016, vol. 50, no. 2, p. 183-187. ISSN: 1580-2949

  • Solar Panel Cooling System with Hollow Fibres

    • Authors: Schmidt, M.; Astrouski, I.; Reppich, M.; Raudenský, M.
    • Year: 2016
    • Source: Applied Solar Energy (English translation of Geliotekhnika), 2016, vol. 52, no. 2, p. 86-92. ISSN: 0003-701X

  • Estimation of the Number of Forward Time Steps for the Sequential Beck Approach Used for Solving Inverse Heat Conduction Problems

    • Authors: Komínek, J.; Pohanka, M.
    • Year: 2016
    • Source: Materiali in tehnologije, 2016, vol. 50, no. 2, p. 207-210. ISSN: 1580-2949

  • Mechanical Properties of Oxidized Steel Samples by Small Punch Test

    • Authors: Raudenský, M.; Horský, J.; Hrabovský, J.; Kotrbáček, P.; Pohanka, M.
    • Year: 2016
    • Source: Hutnické listy, 2016, vol. 69, no. 2, p. 10-16. ISSN: 0018-8069

  • Experimental verifications and numerical thermal simulations of automobile lamps

    • Authors: Guzej, M.; Horský, J.
    • Year: 2016
    • Source: Materiali in tehnologije, 2016, vol. 50, no. 3, p. 289-293. ISSN: 1580-2949

  • In-line heat treatment of flat products

    • Authors: Horský, J.; Hnízdil, M.; Chabičovský, M.; Kotrbáček, P.
    • Year: 2016
    • Source: Proceedings European Conference on Heat Treatment 2016 and 3rd International Conference on Heat Treatment and Surface Engineering in Automotive Applications, 11 – 13 May 2016, Prague, Czech Republic. Čerčany: Asociace pro tepelné zpracování kovů, 2016. p. 1-8. ISBN: 978-80-904462-9-8

  • Effect of stabilizer length on the performance of high pressure descaling nozzles

    • Authors: Votavová, H.; Pohanka, M.
    • Year: 2016
    • Source: METAL 2016, 25rd International Conference on Metallurgy and Materials, Conference Proceedings. Ostrava: TANGER Ltd., 2016. p. 261-266. ISBN: 978-80-87294-67-3

  • Influence of the surface roughness on the cooling intensity during spray cooling

    • Authors: Brožová, T.; Chabičovský, M.; Horský, J.
    • Year: 2016
    • Source: METAL 2016, 25rd International Conference on Metallurgy and Materials, Conference Proceedings. Ostrava: TANGER Ltd., 2016. p. 41-46. ISBN: 978-80-87294-67-3

  • Design of cooling systems for grooved rolls

    • Authors: Komínek, J.; Kotrbáček, P.; Horský, J.
    • Year: 2016
    • Source: METAL 2016, 25rd International Conference on Metallurgy and Materials, Conference Proceedings. Ostrava: TANGER Ltd., 2016. p. 255-260. ISBN: 978-80-87294-67-3

  • Flexible Polymeric Hollow Fiber Heat Exchangers for Electronic Systems

    • Authors: Raudenský, M.; Astrouski, I.; Brožová, T.; Bartuli, E.
    • Year: 2016
    • Source: Thermal and Thermomechanical Phenomena in Electronic Systems ITherm 2016. 2010 IEEE. USA: IEEE, 2016. p. 1143-1147. ISBN: 978-1-4799-5266-3. ISSN: 1087-9870

  • Heat Transfer during Spray Cooling of Flat Surfaces with Water at Large Reynolds Numbers

    • Authors: Hnízdil, M.; Chabičovský, M.; Raudenský, M.; Lee, T-W.
    • Year: 2016
    • Source: Journal of Flow Control, Measurement & Visualization, 2016, vol. 4, no. 3, p. 104-113. ISSN: 2329-3330

  • Overcooling in overlap areas during hydraulic Descaling

    • Authors: Pohanka, M.; Votavová, H.
    • Year: 2016
    • Source: Materiali in tehnologije, 2016, vol. 50, no. 4, p. 575-578. ISSN: 1580-2949

  • Polymeric Hollow Fiber Heat Exchanger as an Automotive Radiator

    • Authors: Krásný, I.; Astrouski, I.; Raudenský, M.
    • Year: 2016
    • Source: Applied Thermal Engineering, 2016, no. 108, p. 798-803. ISSN: 1359-4311

  • Advanced methodology of determination water jet cooling intensity during the casting process

    • Authors: Horský, J.; Komínek, J.; Guzej, M.
    • Year: 2016
    • Source: 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics. ASTFE, 2016. p. 685-688. ISBN: 978-1-77592-124-0

  • Air filtration using polymeric hollow-fibre membranes

    • Authors: Bulejko, P.; Svěrák, T.; Dohnal, M.; Kejík, P.; Krištof, O.; Mayerová, K.
    • Year: 2016
    • Source: 22nd International Congress of Chemical and Process Engineering CHISA 2016 and the 19th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2016. Praha: Czech Society of Chemical Engineering, 2016

  • Experimental investigation of the breakup of spiral-nozzle-produced liquid curtain for absorption processes

    • Authors: Krištof, O.; Svěrák, T.; Kejík, P.; Bulejko, P.; Mayerová, K.; Kalivoda, J.
    • Year: 2016
    • Source: 22nd International Congress of Chemical and Process Engineering CHISA 2016 and the 19th Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction PRES 2016. Praha: Czech Society of Chemical Engineering, 2016

  • Simple mathematical absorption model with system analysis technique

    • Authors: Kalivoda, J.; Svěrák, T.; Krištof, O.; Mayerová, K.
    • Year: 2016
    • Source: Prague: ČSCHI, 2016

  • Recent developments of water and mist spray cooling in continuous casting of steels

    • Authors: Raudenský, M.; Tseng, A.; Horský, J.; Komínek, J.
    • Year: 2016
    • Source: Metallurgical Research and Technology, 2016, vol. 113, no. 5, p. 1-24. ISSN: 2271-3654

  • Polymeric hollow fiber heat exchangers

    • Authors: Raudenský, M.; Astrouski, I.; Brožová, T.
    • Year: 2016
    • Source: Heat Transfer XIV Simulation and Experiments in Heat Transfer and its Applications. WIT Transactions on Engineering Sciences. UK: Wessex Institute, 2016. p. 95-105. ISBN: 978-1-78466-109-0. ISSN: 1743-3533

  • Improvement of S355J2 Steel Mechanical Properties by Heat Treatment

    • Authors: Hnízdil, M.; Chabičovský, M.
    • Year: 2016
    • Source: 24th international conference on materialsand technology. Ljubljana, Slovenia: Inštitut za kovinske materiale in tehnologije, 2016. p. 84-84. ISBN: 978-961-94088-0-3

  • Numerical Investigation of Heat Transfer on the Outer Surface of Polymeric Hollow Fibers

    • Authors: Bartuli, E.; Raudenský, M.
    • Year: 2016
    • Source: 24th international conference on materialsand technology. Ljubljana, Slovenia2016. p. 37-37. ISBN: 978-961-94088-0-3

  • Determination of the Surface Wettability of Polymeric Hollow Fibres

    • Authors: Brožová, T.; Raudenský, M.
    • Year: 2016
    • Source: 24th international conference on materialsand technology. Ljubljana, Slovenia: 2016. p. 47-47. ISBN: 978-961-94088-0-3

  • Thermophysical properties measurement of scale layer on steel substrate using flash method

    • Authors: Pohanka, M.; Chabičovský, M.; Ondruch, T.
    • Year: 2016
    • Source: 24th international conference on materialsand technology. Ljubljana, Slovenia: Inštitut za kovinske materiale in tehnologije, 2016. p. 175-175. ISBN: 978-961-94088-0-3

  • Self-supported Geopolymer-based Barriers for Filtration Applications

    • Authors: Kejík, P.; Bulejko, P.; Svěrák, T.; Krištof, O.; Mayerová, K.
    • Year: 2016
    • Source: 24th international conference on materialsand technology. Ljubljana, Slovenia: Inštitut za kovinske materiale in tehnologije, 2016. ISBN: 978-961-94088-0-3

  • Health risk assessment of PM10 and PM2,5 in the localities of Brno city

    • Authors: Bulejko, P.; Adamec, V.; Schüllerová, B.; Hrabová, K.; Skeřil, R.
    • Year: 2016
    • Source: Sborník XVII. výroční konference České aerosolové společnosti, 25. – 26. října 2016, Mikulov. Praha: Česká aerosolová společnost, 2016. s. 69-72. ISBN: 978-80-86186-85-6

  • Filtration efficiency of hollow-fibre membranes in removing particles from air

    • Authors: Bulejko, P.; Svěrák, T.; Dohnal, M.; Pospíšil, J.; Krištof, O.; Kejík, P.; Kalivoda, J.
    • Year: 2016
    • Source: Sborník XVII. výroční konference České aerosolové společnosti, 25. – 26. října 2016, Mikulov. Praha: Česká aerosolová společnost, 2016. s. 65-68. ISBN: 978-80-86186-85-6

  • Mutual collision of water jets from adjacent high pressure flat jet nozzles on flat surfaces during hydraulic descaling

    • Authors: Pohanka, M.; Raudenský, M.; Hwang, J.; You, J.; Lee, S.
    • Year: 2016
    • Source: Tehnički vjesnik - technical gazette, 2016, vol. 23, no. 5, p. 1389-1394. ISSN: 1330-3651

  • Liquid Sprays for Heat Transfer Enhancements: A Review

    • Authors: Tseng, A.; Raudenský, M.; Lee, T-W
    • Year: 2016
    • Source: Heat Transfer Engineering, 2016, vol. 37, no. 16, p. 1-60. ISSN: 0145-7632

  • Levels, sources and health risk assessment of polycyclic aromatic hydrocarbons in Brno, Czech Republic: A five year study

    • Authors: Bulejko, P.; Adamec, V.; Schüllerová, B.; Skeřil, R.
    • Year: 2016
    • Source: Environmental science and pollution research, 2016, vol. 23, no. 20, p. 20462-20473. ISSN: 0944-1344

  • The Influence of the Structure of Heat Transfer Surfaces on Polymeric Hollow Fibre Heat Exchangers

    • Authors: Brožová, T.; Astrouski, I.; Raudenský, M.
    • Year: 2015
    • Source: Materiali in tehnologije, 2015, vol. 49, no. 3, p. 333-336. ISSN: 1580-2949

  • The Effect of Discontinued Water Spray Cooling on the Heat Transfer Coefficient

    • Authors: Hrabovský, J.; Chabičovský, M.; Horský, J.
    • Year: 2015
    • Source: World Academy of Science, Engineering and Technology, 2015, vol. 9, no. 1, p. 81-87. ISSN: 1307-6892

  • Vliv teploty a koncentrace polymerních roztoků na intenzitu chlazení, při tepelném zpracování

    • Authors: Hřibová, V.; Komínek, J.; Raudenský, M.
    • Year: 2015
    • Source: Hutnické listy, 2015, roč. 68, č. 1, s. 10-15. ISSN: 0018-8069

  • Wet grinding of CaCO3 with a stirred media mill: Influence of obtained particle size distributions on pressure filtration propertie

    • Authors: Kinnarinen, T.; Tuunila, R.; Huhtanen, M.; Häkkinen, A.; Kejík, P.; Svěrák, T.
    • Year: 2015
    • Source: Powder technology, 2015, vol. 273, no. 1, p. 54-61. ISSN: 0032-5910

  • Estimation of the Thermal Contact Conductance From Unsteady Temperature Measurements

    • Authors: Kvapil, J.; Pohanka, M.; Horský, J.
    • Year: 2015
    • Source: Materiali in tehnologije, 2015, vol. 49, no. 2, p. 219-222. ISSN: 1580-2949

  • Heat transfer coefficients for the secondary cooling zones, in a continuous casting with the effect of steel chemistry

    • Authors: Horský, J.; Raudenský, M.; Moravec, R.; Blazek, K.
    • Year: 2015
    • Source: OCELAŘI 2015. Ostrava: Tanger spol. s.r.o., 2015. p. 59-66. ISBN: 978-80-87294-56-7

  • Numerical simulation and verification of roll, temperature history during rolling campaign

    • Authors: Kotrbáček, P.; Horský, J.; Luks, T.; Pohanka, M.
    • Year: 2015
    • Source: Roll5 2015. London, United Kingdom: IOM Communicatiins Ltd, 2015. p. 1-11

  • Progress of the IR measurement in the area of the fine, particulate material water content

    • Authors: Svěrák, T.; Baker, C.; Sikorová, K.; Kejík, P.; Bulejko, P.; Krištof, O.
    • Year: 2015
    • Source: International Journal of Environmental Engineering, 2015, vol. 2, no. 1, p. 146-149. ISSN: 2374-1724

  • In-line tepelné zpracování ocelových profilů a trubek

    • Authors: Chabičovský, M.; Horský, J.; Hnízdil, M.; Stránský, M.
    • Year: 2015
    • Source: Hutnické listy, 2015, roč. 68, č. 2, s. 14-19. ISSN: 0018-8069

  • Influence of the impact angle and pressure on the spray cooling of vertically moving hot steel surfaces

    • Authors: Hnízdil, M.; Chabičovský, M.; Raudenský, M.
    • Year: 2015
    • Source: Materiali in tehnologije, 2015, vol. 49, no. 3, p. 333-336. ISSN: 1580-2949

  • Techniques of measuring spray- cooling homogeneity

    • Authors: Chabičovský, M.; Raudenský, M.
    • Year: 2015
    • Source: Materiali in tehnologije, 2015, vol. 49, no. 3, p. 337-341. ISSN: 1580-2949

  • Determination of Thermal Contact Conductance Based on Unsteady Temperature Measurement

    • Authors: Horský, J.; Kvapil, J.; Keneth, B.; Moravec, R.
    • Year: 2015
    • Source: AISTech 2015. AIST Association for Iron& Steel Technology. 2015. p. 3519-3525. ISBN: 978-1-935117-46- 9. ISSN: 1551-6997

  • Solar panel cooling system with hollow fibres

    • Authors: Raudenský, M.; Astrouski, I.; Reppich, M.; Schmidt, M.
    • Year: 2015
    • Source: SASEC 2015. SASEC2015/ University of Pretoria, 2015. p. 316-320. ISBN: 978-1-77592-109-7

  • Effect of Various Spray Cooling Configurations on Hardness Profile of Tubes

    • Authors: Stránský, M.; Brožová, T.; Raudenský, M.; Hnízdil, M.; Turoň, R.
    • Year: 2015
    • Source: METAL 2015 24th International Conference on Metallurgy and Materials. 1. Ostrava: Tanger Ltd Ostrava, 2015. p. 1-6. ISBN: 978-80-87294-58-1

  • Study of Water Jets Collision of High Pressure Flat Jet Nozzles for Hydraulic Descaling

    • Authors: Votavová, H.; Pohanka, M.
    • Year: 2015
    • Source: Engineering mechanics 2015, 21st International Conference Engineering Mechanics 2015. Engineering mechanics 2014. 1. Svratka: Institute of Theoretical and Applied Mechanics, 2015. p. 354-355. ISBN: 978-80-86246-42- 0. ISSN: 1805-8248

  • Determination of the turning knife thermal stress during longitudinal turning

    • Authors: Stránský, M.
    • Year: 2015
    • Source: ENGINEERING MECHANICS 2015, 21st International Conference Engineering Mechanics 2015. Engineering mechanics 2014. 1. Svratka: Institute of Theoretical and Applied Mechanics, 2015. p. 298-299. ISBN: 978-80-86246-42- 0. ISSN: 1805-8248

  • Fatigue Testing of Polymeric Hollow Fibre Heat Transfer Surfaces, by Pulsating Pressure Loads

    • Authors: Brožová, T.; Luks, T.; Astrouski, I.; Raudenský, M.
    • Year: 2015
    • Source: ENGINEERING MECHANICS 2015, 21st International Conference Engineering Mechanics 2015. Engineering mechanics 2014. 1. Svratka: Institute of Theoretical and Applied Mechanics, 2015. p. 30-31. ISBN: 978-80-86246-42- 0. ISSN: 1805-8248

  • Design of quenching units for heat treatment of tubes

    • Authors: Chabičovský, M.; Horský, J.; Raudenský, M.; Hnízdil, M.; Kotrbáček, P.
    • Year: 2015
    • Source: European conference on Heat treatment 2015 a 22nd IFHTSE congres. Miláno: Associazione Italiana di metallurgia, 2015. p. 1-9. ISBN: 978-88-98990-03-0

  • Water jet cooling of aluminium alloy

    • Authors: Guzej, M.; Bartuli, E.; Krištof, O.
    • Year: 2015
    • Source: Metal 2015 full texts of papers. Ostrava: TANGER Ltd., 2015. p. 1-6. ISBN: 978-80-87294-58-1

  • Cooling homogeneity measurement during hydraulic descaling in spray overlapping area

    • Authors: Votavová, H.; Pohanka, M.; Bulejko, P.
    • Year: 2015
    • Source: METAL 2015 24th International Conference on Metallurgy and Materials. 1. Ostrava: Tanger Ltd Ostrava, 2015. p. 1-6. ISBN: 978-80-87294-58-1

  • Methodology of Evaluation of Heat Transfer Experiment on Aluminum sample

    • Authors: Komínek, J.; Hřibová, V.; Pohanka, M.
    • Year: 2015
    • Source: METAL 2015 Full Texts of Papers. Ostrava: TANGER, 2015. p. 1-6. ISBN: 978-80-87294-58-1

  • Heat treatment of tubes

    • Authors: Chabičovský, M.; Votavová, H.; Horský, J.; Turoň, R.; Šimeček, P.
    • Year: 2015
    • Source: In METAL 2015, 24rd International Conference on Metallurgy and Materials, Conference Proceedings. Ostrava: Tanger Ltd., 2015. p. 1-6. ISBN: 978-80-87294-58-1

  • The heat transfer coefficient at discontinued water spray cooling

    • Authors: Hrabovský, J.; Chabičovský, M.; Astrouski, I.; Kotrbáček, P.
    • Year: 2015
    • Source: METAL 2015, 24rd International Conference on Metallurgy and Materials, Conference Proceedings. Ostrava: TANGER, 2015. p. 1-6. ISBN: 978-80-87294-58-1

  • Effects of oxide layer on Leidenfrost temperature during spray cooling of steel at high temperatures

    • Authors: Chabičovský, M.; Hnízdil, M.; Tseng, A.; Raudenský, M.
    • Year: 2015
    • Source: International journal of heat and mass transfer, 2015, no. 88, p. 236-246. ISSN: 0017-9310

  • Stanovení tepelného odporu v kontaktu na základě nestacionárního teplotního měření

    • Authors: Kvapil, J.; Horský, J.; Pohanka, M.
    • Year: 2015
    • Source: Hutnické listy, 2015, roč. LXVIII, č. 4, s. 15-19. ISSN: 0018-8069

  • Methodology of Evaluation of Intensity of Cooling of Water Jet Impinging on the Vertical Surface

    • Authors: Komínek, J.; Guzej, M.; Horský, J.
    • Year: 2015
    • Source: Hutnické listy, 2015, roč. LXVIII, č. 4, s. 26-30. ISSN: 0018-8069

  • Experimental Determination of Thermal Flux and Contact Stresses in the Rolling Gap

    • Authors: Luks, T.; Horský, J.; Bartuli, E.
    • Year: 2015
    • Source: Hutnické listy, 2015, roč. LXVIII, č. 4, s. 9-14. ISSN: 0018-8069

  • Stanovení intenzity chlazení během semikontinuálního odlévání hliníkových slitin

    • Authors: Guzej, M.; Horský, J.
    • Year: 2015
    • Source: Hutnické listy, 2015, roč. LXVIII, č. 4, s. 20-25. ISSN: 0018-8069

  • Highly efficient and energy-efficient cooling systems for cooling profile rollers

    • Authors: Kotrbáček, P.; Horský, J.; Parilák, L.; Ma´tas, P.; Zalaba, D.
    • Year: 2015
    • Source: Odborná konferencia ŽP VVC 2015. 1. Brezno: HLP grafik s.r.o., 2015. s. 91-97. ISBN: 9788097209155

  • Overcooling in overlapping areas during hydraulic descaling

    • Authors: Pohanka, M.; Votavová, H.
    • Year: 2015
    • Source: Book of abstracts. 23rd International Conference on Materials and Technology. Ljubljana: Inštitut za kovinske materiale in tehnologije, Ljubljana, Lepi pot 11, 2015. p. 199-199. ISBN: 978-961-92518-8-1

  • Attritor iron content measurement via objective colour determination

    • Authors: Kejík, P.; Svěrák, T.; Krištof, O.; Bulejko, P.; Mayerová, K.
    • Year: 2015
    • Source: 23rd international conference on materialsand technology program and book of abstracts. Ljubljana, Lepi pot 11, Ljubljana, Slovenija: Inštitut za kovinske materiale in tehnologije, 2015. p. 125-125. ISBN: 978-961-92518-8-1

  • Influence of Chemical Additives and Curing Conditions on Mechanical Properties and Carbonation Resistance of Alkali Activated Slag Composites

    • Authors: Bulejko, P.; Bílek, V.
    • Year: 2015
    • Source: 23rd INTERNATIONAL CONFERENCE ON MATERIALSAND TECHNOLOGY PROGRAM AND BOOK OF ABSTRACTS. Ljubljana, Lepi pot 11, Ljubljana, Slovenija: Inštitut za kovinske materiale in tehnologije, 2015. p. 66-66. ISBN: 978-961-92518-8-1

  • Visualisation and quantitative analysis of flat continuous water jet structure

    • Authors: Ščučka, J.; Zeleňák, M.; Foldyna, J.; Lehocká, D.; Votavová, H.
    • Year: 2015
    • Source: Vodní Paprsek 2015 - Výzkum, vývoj, aplikace, Water Jet 2015 - Research, Development, Application. Prešov: Ústav geoniky AV ČR, v.v.i., 2015. p. 195-205. ISBN: 978-80-86407-56-2

  • Vysoce účinné a energeticky úsporné chladicí systémy pro chlazení, profilových válců

    • Authors: Kotrbáček, P.; Horský, J.; Parilák, L.; Ma´tas, P.; Zalaba, D.
    • Year: 2015
    • Source: Zváranie - Svařování, 2015, roč. 5- 6, č. 64, s. 135-139. ISSN: 0044-5525

  • Prediction of pressure filtration characteristics of CaCO3 suspensions, ground in a vertical stirred media mill

    • Authors: Kinnarinen, T.; Tuunila, R.; Huhtanen, M.; Häkkinen, A.; Kejík, P.; Svěrák, T.
    • Year: 2015
    • Source: MINERALS ENGINEERING, 2015, vol. 83, no. 1, p. 201-204. ISSN: 0892-6875

  • Fouling of Polymeric Hollow Fiber Heat Exchanger by Wastewater

    • Authors: Astrouski, I.; Raudenský, M.; Dohnal, M.
    • Year: 2015
    • Source: Proceedings of the 18th International Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction (PRES 2015). CHEMICAL ENGINEERING TRANSACTIONS. Italy: Italian Association of Chemical Engineering - AIDIC, 2015. p. 949-954. ISBN: 978-88-95608-36- 5. ISSN: 2283-9216

  • Bulk properties of surface treated limestone powders

    • Authors: Svěrák, T.; Bulejko, P.; Kejík, P.; Mayerová, K.; Krištof, O.; Raudenský, M.
    • Year: 2015
    • Source: Conference Proceedings, 1st International Conference on Applied Mineralogy & Advanced Materials – AMAM2015. Conference Proceedings, 1st International Conference on Applied Mineralogy & Advanced Materials – AMAM2015. Digilabs S.a.s., 2015. p. 71-76. ISSN: 2283-5954

  • Study of Overlapping Area of High Pressure Flat Water Jets Used for Hydraulic Descaling

    • Authors: Votavová, H.; Pohanka, M.
    • Year: 2015
    • Source: Ph.D. Workshop 2015 Proceedings. Ostrava: Ediční středisko VŠB - TU Ostrava, 2015. p. 24-24. ISBN: 978-80-86407-62-3

  • Effects of titania nanoparticles on heat transfer performance of spray cooling with full cone nozzle

    • Authors: Tseng, A.; Bellerová, H.; Pohanka, M.; Raudenský, M.
    • Year: 2014
    • Source: Applied Thermal Engineering, 2014, vol. 62, no. 1, p. 20-27. ISSN: 1359-4311

  • Landfills multiple goal optimization using equationless qualitative relations

    • Authors: Dohnal, M.
    • Year: 2014
    • Source: American Journal of Environmental Sciences, 2014, roč. 10, č. 1, s. 26-34. ISSN: 1553-345X

  • Are Patenting Activities in U.S. Universities Still Affected by Bayh-Dole Act?

    • Authors: Tseng, A.; Raudenský, M.
    • Year: 2014
    • Source: China - USA Business Review, 2014, vol. 13, no. 3, p. 141-155. ISSN: 1537-1514

  • Advances in Geopolymer Membrane Filtration Mechanical Properties

    • Authors: Svěrák, T.; Bulejko, P.; Šípková, H.
    • Year: 2014
    • Source: 2014 Membrane Technology Conference and Exposition. Las Vegas, Nevada, USA, 2014: American Water Works Association, 2014

  • Water Temperature Effect on Cooling Intensity for high Pressure Descaling Nozzles

    • Authors: Pohanka, M.; Raudenský, M.; Hwang, J.; You, J.; Lee, S.
    • Year: 2014
    • Source: London, UK: IOM Communications Ltd, 2014. p. 71-74

  • Experimental investigation of stabilization of flowing water temperature with a water- PCM heat exchanger

    • Authors: Charvát, P.; Štětina, J.; Pech, O.; Klimeš, L.; Ostrý, M.
    • Year: 2014
    • Source: EPJ Web of Conferences, 2014, vol. 2014, no. 67, p. 1-4. ISSN: 2100-014X

  • Study of the work roll cooling in hot rolling process with regard on service life

    • Authors: Zahradník, R.; Raudenský, M.; Hrabovský, J.
    • Year: 2014
    • Source: La Metallurgia Italiana, 2014, vol. 2014, no. 4, p. 21-28. ISSN: 0026-0843

  • Performance Evaluations of Technology Transfer Offices of Major US Research Universities

    • Authors: Tseng, A.; Raudenský, M.
    • Year: 2014
    • Source: Journal of Technology Management and Innovation, 2014, vol. 9, no. 1, p. 93-102. ISSN: 0718-2724

  • Možnosti využití termoelektrických jevů pro výrobu elektrické energie

    • Authors: Brázdil, M.; Pospíšil, J.; Horský, J.
    • Year: 2014
    • Source: Ostrava: 2014. p. 16-18

  • Heat Transfer Inside of Polymeric Hollow Fiber

    • Authors: Raudenský, M.; Astrouski, I.
    • Year: 2014
    • Source: Marseille: HTFFM- V, 2014. p. 150-150

  • The Effect of Steel Composition on the Interfacial Heat Transfer Coefficients for the Secondary Cooling Zones in a Continuous Caster

    • Authors: Kenneth, B.; Moravec, R.; Horský, J.; Guzej, M.
    • Year: 2014
    • Source: AISTech 2014 Iron and Steel Technology Conference. AIST Association for Iron& Steel Technology. Indianapolis: AISTech 2014, 2014. p. 2873-2880. ISBN: 9781935117421. ISSN: 1551-6997

  • Mechanical and filtering properties of non-sintered porous solids for filtration applications

    • Authors: Bulejko, P.; Svěrák, T.
    • Year: 2014
    • Source: Engineering Mechanics 2014, 20th International Conference, May 12-15, 2014, Svratka, Czech Republic. Engineering mechanics 2014. Brno: Institute of Solid Mechanics, Mechatronics and Biomechanics, Faculty of Mechanical Engineering, Brno University of Technology, 2014. p. 112-115. ISBN: 978-80-214-4871- 1. ISSN: 1805-8248

  • Heat Transfer Simulation of Heat Exchangers Made by Polymeric Hollow Fibers

    • Authors: Hřibová, V.; Komínek, J.; Astrouski, I.; Raudenský, M.; Tseng, A.
    • Year: 2014
    • Source: Engineering Mechanics 2014, 20th International Conference, May 12-15, 2014, Svratka, Czech Republic. Brno: Institute of Solid Mechanics, Mechatronics and Biomechanics, Faculty of Mechanical Engineering, Brno University of Technology, 2014. p. 236-239. ISBN: 978-80-214-4871-1

  • Plastic heat exchanger using twisted hollow fibers

    • Authors: Astrouski, I.; Raudenský, M.
    • Year: 2014
    • Source: Engineering Mechanics 2014, 20th International Conference, May 12-15, 2014, Svratka, Czech Republic. Brno: Institute of Solid Mechanics, Mechatronics and Biomechanics, Faculty of Mechanical Engineering, Brno University of Technology, 2014. p. 56-60. ISBN: 978-80-214-4871-1

  • Impact of oxide scale on heat treatment of steels

    • Authors: Raudenský, M.; Chabičovský, M.; Hrabovský, J.
    • Year: 2014
    • Source: METAL 2014, 23rd International Conference on Metallurgy and Materials, Conference Proceedings. Ostrava: Tanger Ltd., 2014. p. 553-558. ISBN: 978-80-87294-54-3

  • Improvement of work roll service life by microstructure simulation

    • Authors: Zahradník, R.; Raudenský, M.
    • Year: 2014
    • Source: METAL 2014, 23rd International Conference on Metallurgy and Materials, Conference Proceedings. Ostrava: Tanger Ltd., 2014. p. 1-6. ISBN: 978-80-87294-54-3

  • In-line heat treatment of long products

    • Authors: Horský, J.; Kotrbáček, P.
    • Year: 2014
    • Source: METAL 2014, 23rd International Conference on Metallurgy and Materials, Conference Proceedings. Ostrava: Tanger Ltd., 2014. p. 1-6. ISBN: 978-80-87294-54-3

  • Spray Cooling Unit for Heat Treatment of Stainless Steel Sheets

    • Authors: Hnízdil, M.; Chabičovský, M.; Raudenský, M.; Magadoux, E.; Code, F.
    • Year: 2014
    • Source: Advanced Materials Research, 2014, vol. 936, no. 1, p. 1720-1724. ISSN: 1022-6680

  • Non-sintered porous barriers based on granular materials and inorganic binders

    • Authors: Bulejko, P.; Svěrák, T.
    • Year: 2014
    • Source: 13th International Conference on Inorganic Membranes, July 6-9, 2014, Brisbane, Australia, Book of Abstracts. 2014

  • The effect of spray water temperature on secondary cooling spray heat transfer coefficients and methods for implementing the effect in a dynamic cooling control model

    • Authors: Horský, J.; Moravec, R.; Blazek, K.; Guzej, M.
    • Year: 2014
    • Source: Proceedings - 8th European Continuous Casting Conference. Graz, Austria: ASMET, 2014. p. 1-10. ISBN: 978-3-200-03664-2

  • Material parameters estimation of Small Punch test by two variants of genetic algorithms

    • Authors: Hrabovský, J.; Lošák, P.; Horský, J.
    • Year: 2014
    • Source: 22nd SVSFEM ANSYS Users' Group Meeting and Conference 2014. 1. Jasná: SVS FEM s.r.o., 2014. p. 57-65. ISBN: 978-80-905525-1-7

  • Polymeric Hollow Fiber Heat Exchangers: Liquid-to- Gas Application

    • Authors: Astrouski, I.; Raudenský, M.
    • Year: 2014
    • Source: ASHRAE Conferences, 2014 Annual Conference, Seattle, WA

  • Impact of the oxide scale on spray cooling intensity

    • Authors: Horský, J.; Hrabovský, J.; Raudenský, M.
    • Year: 2014
    • Source: In Heat treatment of steel is attended by oxide scales growth with various physical properties. The most common and most dominant impact of the oxide scale layers is on the surface quality and mechanical properties of steel. This paper is focused on study o. Orlando, Florida: HEFAT, 2014. p. 1480-1485. ISBN: 978-1-77592-068-7

  • Recent trends of technology transfer in US universities with comparison to those following Bayh-Dole Act

    • Authors: Tseng, A.; Raudenský, M.
    • Year: 2014
    • Source: International Journal of Technology Transfer and Commercialisation, 2014, vol. 12, no. 1/2/ 3, p. 139-156. ISSN: 1470-6075

  • Small Punch Tests at Oxide Scales Surface of Structural Steel and Low Silicon Steel

    • Authors: Hrabovský, J.; Dobeš, F.; Horský, J.
    • Year: 2014
    • Source: Oxidation of Metals, 2014, vol. 82, no. 3- 4, p. 297-310. ISSN: 1573-4889

  • Optimization of the secondary cooling in a continuous casting process with different optimization of the secondary cooling in a continuous casting process with different slab cross-sections

    • Authors: Mauder, T.; Štětina, J.
    • Year: 2014
    • Source: Materiali in tehnologije, 2014, vol. 48, no. 4, p. 521-524. ISSN: 1580-2949

  • Specific grinding energy and phase changes of the limestone and corundum ground stock in the ultrafine activated comminution process

    • Authors: Kejík, P.; Svěrák, T.; Sikorová, K.; Krištof, O.; Bulejko, P.
    • Year: 2014
    • Source: 21st International Congress of Chemical Engineering CHISA 2014 and 17th Conference PRES 2014, 23 - 27 August 2014, Praha, Czech Republic, Czech Society of Chemical Engineering. 2014. p. 1 (1 s.). ISBN: 978-80-02-02555-9

  • Fouling of plastic fiber heat exchanger

    • Authors: Astrouski, I.; Raudenský, M.; Dohnal, M.
    • Year: 2014
    • Source: 21st International Congress of Chemical Engineering CHISA 2014 and 17th Conference PRES 2014, 23 - 27 August 2014, Praha, Czech Republic, Czech Society of Chemical Engineering. 2014. p. 1 (1 s.). ISBN: 978-80-02-02555-9

  • Bulk properties of micro-fine ligneous fillers

    • Authors: Svěrák, T.; Kejík, P.; Slanina, O.; Sikorová, K.; Bulejko, P.
    • Year: 2014
    • Source: 21st International Congress of Chemical and Process Engineering CHISA 2014 and 17th Conference PRES 2014, Authors of papers. Praha: Orgit Ltd., 2014. p. 1-10. ISBN: 978-80-02-02555-9

  • CO2 absorption to the NaOH solution using pilot-plant wet shower scrubber

    • Authors: Krištof, O.; Svěrák, T.; Kejík, P.; Bulejko, P.; Sikorová, K.
    • Year: 2014
    • Source: 21st International Congress of Chemical Engineering CHISA 2014 and 17th Conference PRES 2014, 23 - 27 August 2014, Praha, Czech Republic, Czech Society of Chemical Engineering. 2014. ISBN: 978-80-02-02555-9

  • The potential use of geopolymer-based materials in filtration applications

    • Authors: Bulejko, P.; Svěrák, T.; Kejík, P.; Krištof, O.; Sikorová, K.
    • Year: 2014
    • Source: 21st International Congress of Chemical Engineering CHISA 2014 and 17th Conference PRES 2014, 23 - 27 August 2014, Praha, Czech Republic, Czech Society of Chemical Engineering. 2014. ISBN: 978-80-02-02555-9

  • Experimentální a výpočetní stanovení přestupu tepla u dvouvstupé turbínové skříně

    • Authors: Hrabovský, J.; Klíma, J.; Komárek, M.; Horský, J.
    • Year: 2014
    • Source: TURBOSTROJE 2014. Plzeň: Klub ASI –Turbostroje - Plzeň a Doosan Škoda Power s.r.o., 2014. s. 1-13. ISBN: 978-80-260-6447-3

  • Estimation of the Number of Forward Time Steps for the Sequential Beck Approach Used for Solving Inverse Heat Conduction Problems

    • Authors: Komínek, J.; Pohanka, M.
    • Year: 2014
    • Source: 22nd INTERNATIONAL CONFERENCE ON MATERIALS AND TECHNOLOGY. Ljubljana, Slovenia: Inštitut za kovinske materiale in tehnologije, Ljubljana, Lepi pot 11, Ljubljana, Slovenija, 2014. p. 122-122. ISBN: 978-961-92518-7-4

  • Coir-based fillers grinding and bulk properties

    • Authors: Kejík, P.; Svěrák, T.; Sikorová, K.; Krištof, O.; Bulejko, P.
    • Year: 2014
    • Source: 22nd international conference on materials and technology. Ljubljana, Slovenia: Inštitut za kovinske materiale in tehnologije, Ljubljana, Lepi pot 11, Ljubljana, Slovenija, 2014. p. 111-111. ISBN: 978-961-92518-7-4

  • Filtration Membranes Based on Secondary Materials: Preparation, Characterization, and Properties

    • Authors: Bulejko, P.; Sikorová, K.; Kejík, P.; Krištof, O.; Svěrák, T.
    • Year: 2014
    • Source: 22nd INTERNATIONAL CONFERENCE ON MATERIALS AND TECHNOLOGY. Ljubljana, Slovenia: Inštitut za kovinske materiale in tehnologije, Ljubljana, Lepi pot 11, Ljubljana, Slovenija, 2014. ISBN: 978-961-92518-7-4

  • Pilot-Plant Shower Scrubber for Cleaning Polluted Gas

    • Authors: Krištof, O.; Svěrák, T.; Bulejko, P.; Kejík, P.; Sikorová, K.
    • Year: 2014
    • Source: 22nd INTERNATIONAL CONFERENCE ON MATERIALS AND TECHNOLOGY. Ljubljana, Slovenia: Inštitut za kovinske materiale in tehnologije, Ljubljana, Lepi pot 11, Ljubljana, Slovenija, 2014. p. 128-128. ISBN: 978-961-92518-7-4

  • Experimental verifications and numerical thermal simulations of automobile lamps

    • Authors: Guzej, M.; Horský, J.; Gallovič, D.; Černý, P.
    • Year: 2014
    • Source: 22nd INTERNATIONAL CONFERENCE ON MATERIALS AND TECHNOLOGY. Ljubljana, Slovenia: Inštitut za kovinske materiale in tehnologije, Ljubljana, Lepi pot 11, Ljubljana, Slovenija, 2014. p. 90-90. ISBN: 978-961-92518-7-4

  • Do you wish to save energy when grinding cement clinker? Do not be afraid of chemistry then!

    • Authors: Svěrák, T.
    • Year: 2014
    • Source: ECRA Round Table “Future Grinding Technologies”, Duesseldorf: European Cement Research Academy, 2014

  • Strategy of energy saving and high efficiecy roll cooling systems design

    • Authors: Horský, J.; Kotrbáček, P.; Hrabovský, J.
    • Year: 2014
    • Source: The Netherlands: IOM Communications Ltd, 2014

  • Assessments of technology transfer activities of US universities and associated impact of Bayh–Dole Act

    • Authors: Tseng, A.; Raudenský, M.
    • Year: 2014
    • Source: Scientometrics, 2014, vol. 101, no. 3, p. 1851-1869. ISSN: 0138-9130

  • Progress of the IR measurement in the area of the fine particulate material water content

    • Authors: Svěrák, T.; Baker, C.; Sikorová, K.; Kejík, P.; Bulejko, P.; Krištof, O.
    • Year: 2014
    • Source: Proceedings of the 2nd International Conference on Advances in Applied Science and Environmental Engineering. USA: Institute of Research Engineers and Doctors, 2014. p. 20-23. ISBN: 978-1-63248-033-0

  • Heat-Flux Computation From Measured-Temperature Histories During Hot Rolling

    • Authors: Ondroušková, J.; Pohanka, M.; Vervaet, B.
    • Year: 2013
    • Source: Materiali in tehnologije, 2013, vol. 47, no. 1, p. 85-87. ISSN: 1580-2949.

  • Measurement of Thermal Load on Working Rolls during Hot Rolling

    • Authors: Raudenský, M.; Horský, J.; Ondroušková, J.; Vervaet, B.
    • Year: 2013
    • Source: steel research international, (Online), 2013, vol. 84, no. 3, p. 269-275. ISSN: 1869-344X

  • Efficiency of grinding stabilizers in cement clinker processing

    • Authors: Svěrák, T.; Baker, C.; Kozdas, O.
    • Year: 2013
    • Source: MINERALS ENGINEERING, 2013, vol. 2013, no. 43- 44, p. 52-57. ISSN: 0892-6875

  • Intensification of spray cooling by presence of oxides

    • Authors: Raudenský, M.; Hrabovský, J.; Jančíková, Z.
    • Year: 2013
    • Source: Oceláři. Ostrava: Tanger spol. s.r.o., 2013. p. 113-118. ISBN: 978-80-87294-37-6

  • Analysis of atypical break out during a radial continuous casting of a slab in the straightening zone I. Numerical simulation of temperature field of a slab

    • Authors: Kavička, F.; Štětina, J.; Sekanina, B.; Stránský, K.; Dobrovská, J.; Mauder, T.; Masarik, M.
    • Year: 2013
    • Source: Hutnické listy, 2013, vol. 2013, no. 2, p. 53-59. ISSN: 0018-8069

  • Problems with the Continous Measurement of the Powdered Materials Moisture Content

    • Authors: Svěrák, T.; Sikorová, K.
    • Year: 2013
    • Source: International Congress on Particle Technology PARTEC 2013, Nurnberg, 23.-25.4. 2013. Nurnberg: Nurmberg Messe GmbH, 2013. ISBN: 978-3-00-040578-5

  • Experimental Investigation of the Heat Transfer Coeficient

    • Authors: Chabičovský, M.; Raudenský, M.
    • Year: 2013
    • Source: Materiali in tehnologije, 2013, vol. 47, no. 3, p. 395-398. ISSN: 1580-2949

  • Analysis of Directly Measured Heat Transfer Coefficients During Special Experiments to Provide Better Understanding of Secondary Cooling During Continuous Casting Process

    • Authors: Horský, J.; Ondroušková, J.; Moravec, R.; Blazek, K.; Yin, H.
    • Year: 2013
    • Source: 2013 AISTech Conference Proceedings. AIST Association for Iron& Steel Technology. Pittsburgh: AISTech 2012, 2013. p. 1401-1409. ISBN: 978-1-935117-33-9. ISSN: 1551-6997

  • Experimental Investigation of Spray Cooling of Horizontally and Vertically Oriented Surfaces

    • Authors: Chabičovský, M.; Raudenský, M.
    • Year: 2013
    • Source: Conference proceedings of 22nd Conference on metallurgy and materials. první. Ostrava: Tanger, s.r.o., 2013. p. 102-107. ISBN: 978-80-87294-39-0

  • Determination of Temperature Dependent Cooling Intensity for the Simulation of In-line Heat Treatment

    • Authors: Komínek, J.; Pohanka, M.; Ondroušková, J.
    • Year: 2013
    • Source: Conference proceedings of 22nd Conference on metallurgy and materials. 1. 2013. p. 34-40. ISBN: 978-80-87294-39-0

  • Estimation of Fracture Toughness of The Oxide Scales

    • Authors: Hrabovský, J.; Lošák, P.; Horský, J.
    • Year: 2013
    • Source: 22. ročník mezinárodní konference metalurgie a materiálů METAL 2013. 1. Brno: Tanger Ltd., 2013. p. 1-6. ISBN: 978-80-87294-39-0

  • On-line Fuzzy Regulator For Continuous Casting Process

    • Authors: Mauder, T.; Štětina, J.; Masarik, M.
    • Year: 2013
    • Source: METAL 2013 Conference proceedings. Ostrava: Tanger s.r. o, 2013. p. 33-39. ISBN: 978-80-87294-39-0

  • Analysis of breakout of concast steel slab via criteria of similarity

    • Authors: Kavička, F.; Stránský, K.; Dobrovská, J.; Sekanina, B.; Štětina, J.; Masarik, M.
    • Year: 2013
    • Source: METAL 2013 Conference Proceedings. 1. Ostrava: Tanger, 2013. p. 32-33. ISBN: 978-80-87294-39-0

  • Srovnání dvou optimalizačních metod při hledání materiálových parametrů pro protlačovací zkoušku

    • Authors: Hrabovský, J.; Lošák, P.; Horský, J.
    • Year: 2013
    • Source: Techsoft Engineering ANSYS 2013 Setkání uživatelů a konference. 1. Praha: ARCADEA, 2013. s. 55-62. ISBN: 978-80-905040-2-8

  • Solar Air Heating in Buildings

    • Authors: Charvát, P.; Štětina, J.; Klimeš, L.
    • Year: 2013
    • Source: 11th International Conference on HEAT ENGINES AND ENVIRONMENTAL PROTECTION Subtitle: The Role of Renewable Resources and Fuels in Energy Generation. Budapest: Budapest University of Technology and Economics, 2013. p. 111-115. ISBN: 978-963-313-091-9

  • Contact stress distribution and roll surface temperature in the roll gap analyzed with different sensors

    • Authors: Luks, T.; Horský, J.; Nilsson, A.; Jonssons, N.; Lagergren, J.
    • Year: 2013
    • Source: Rollling2013. 2013. p. 1-13. ISBN: 9788885298958

  • Study of the work roll cooling in hot rolling process with regard on service life

    • Authors: Zahradník, R.; Hrabovský, J.; Raudenský, M.
    • Year: 2013
    • Source: Rolling 2013. 1. Venice: AIM Italy, 2013. p. 1-12. ISBN: 9788885298958

  • Influence of the oxide scale on spray cooling intensity

    • Authors: Hrabovský, J.; Raudenský, M.; Horský, J.
    • Year: 2013
    • Source: Rolling 2013. 1. Venice: AIM Italy, 2013. p. 1-7. ISBN: 9788885298958

  • Optimization of Working Roll Cooling in Hot Rolling

    • Authors: Kotrbáček, P.; Horský, J.; Kvapil, J.; Schoerkhuber, K.
    • Year: 2013
    • Source: Rolling 2013. Milano, Italy: Associazione Italiana di metallurgia, 2013. p. 1-11. ISBN: 9788885298958

  • Prediction of cracks of continuously cast steel slab

    • Authors: Kavička, F.; Sekanina, B.; Štětina, J.; Stránský, K.; Dobrovská, J.
    • Year: 2013
    • Source: 32. Stretnutie katedier mechaniky tekutin a termomechaniky Hydro/ Termo Zborník príspevkov. 1. Žilina: Žilinská univerzita v Žiline, 2013. p. 117-120. ISBN: 978-80-554-0715-9

  • Heuristic Approach to The Inverse Heat Conduction Problem

    • Authors: Mauder, T.; Raudenský, M.
    • Year: 2013
    • Source: Proceedings of 19th International Conference on Soft Computing MENDEL 2013. 1. Brno: 2013. p. 173-178. ISBN: 978-80-214-4755-4

  • Temperature Field and Solidification Structure of a Ductile-Cast-Iron Roller

    • Authors: Kavička, F.; Dobrovská, J.; Stránský, K.; Sekanina, B.; Štětina, J.
    • Year: 2013
    • Source: 7th International Conference MSMF7 Materials structure, micromechanics of fracture Abstract booklet. Brrno: VUTIUM Brno, 2013. p. 181-181. ISBN: 978-80-214-4739-4

  • Zone Analysis of Atypical Breakout during Radial Continuous Casting of a Slab in the Straightening Zone II. Analysis of the Causes of the Breakout by Application of the Theory of Physical Similarity

    • Authors: Stránský, K.; Kavička, F.; Dobrovská, J.; Dobrovská, V.; Sekanina, B.; Štětina, J.
    • Year: 2013
    • Source: Hutnické listy, 2013, vol. LXVI/ 2013, no. 3, p. 17-25. ISSN: 0018-8069

  • Breakout of a Slab as the Result of Changes in the Thermo-physical Properties of Continuously Cast Steel

    • Authors: Kavička, F.; Dobrovská, J.; Stránský, K.; Sekanina, B.; Štětina, J.; Mauder, T.
    • Year: 2013
    • Source: Fatigue & Fracture of Engineering Materials & Structures, 2013, vol. 2013, no. 2, p. 1-10. ISSN: 8756-758X

  • Particulate Fouling of Polymeric Hollow Fiber Heat Exchanger

    • Authors: Astrouski, I.; Raudenský, M.; Dohnal, M.
    • Year: 2013
    • Source: Proceeding of International Conference on Heat Exchanger Fouling and Cleaning – 2013. Hungary, Budapest, 2013. p. 233-239

  • Selection of scenarios in qualitative models: the case of a government tenders model

    • Authors: Dohnal, M.; Veselý, Š.
    • Year: 2013
    • Source: Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 2013, roč. LXI, č. 7, s. 2923-2929. ISSN: 1211-8516

  • Comparison of the temperature field continuously cast steel slabs with different chemical composition

    • Authors: Kavička, F.; Stránský, K.; Sekanina, B.; Štětina, J.; Masarik, M.; Mauder, T.
    • Year: 2013
    • Source: Materiali in tehnologije, 2013, vol. 47 (2013), no. 4, p. 497-501. ISSN: 1580-2949

  • Metal powder grinding in the pilot plant size ball mill conditions

    • Authors: Svěrák, T.; Baker, C.
    • Year: 2013
    • Source: Proceeding of 13th European Symposium on Comminution and Classification. Braunschweig: Sierke Verlag, 2013. p. 368-371. ISBN: 978-3-86844-551-0

  • Computing Cooling Intensity from Descaling Experiments

    • Authors: Ondroušková, J.; Komínek, J.; Pohanka, M.
    • Year: 2013
    • Source: Steelsim 2013. 2013. p. 19-19. ISBN: 978-80-260-3912-9

  • Comparison of material models in the study of mechanical properties of the oxide scales

    • Authors: Hrabovský, J.; Lošák, P.; Horský, J.
    • Year: 2013
    • Source: STEELSIM 2013. 1. Ostrava: OCELOT, Lt., Ostrava, Czech Republic, 2013. p. 21-22. ISBN: 978-80-260-3912-9

  • Polymer hollow-fiber heat exchanger and its application to car radiator

    • Authors: Tseng, A.; Raudenský, M.
    • Year: 2013
    • Source: IN-TECH 2013. Rijeka, Croatia: Faculty of Engineering University of Rijeka, 2013. p. 281-284. ISBN: 978-953-6326-88-4

  • Milling and bulk properties of special very fine wood powders

    • Authors: Kejík, P.; Svěrák, T.; Slanina, O.
    • Year: 2013
    • Source: Selected processes at the wood processing. Zvolen, Slovakia: Department of Chemistry and Chemical Technologies, 2013. p. 1-10. ISBN: 978-80-228-2534-4

  • Estimation of Thermal Contact Conductance from unsteady temperature measurements

    • Authors: Kvapil, J.; Pohanka, M.; Horský, J.
    • Year: 2013
    • Source: Steelsim 2013. Ostrava: VŠB - Technical university of Ostrava, 2013. p. 27-33. ISBN: 978-80-260-3912-9

  • Dynamic Simulation of Slab Centerline Behavior of the Continuous Casting Process during Large Speed Transitions and Their Effects on Slab Internal Quality

    • Authors: Kenneth, B.; Rudolf, M.; Kai, Z.; Michael, L.; Hongbin, Y.; Guzej, M.; Horský, J.
    • Year: 2013
    • Source: Steelsim 2013. Ostrava: VŠB - Technical university of Ostrava, 2013. p. 1-12. ISBN: 978-80-260-3912-9

  • On-line numerical model of temperature field of continuously cast steel slab

    • Authors: Kavička, F.; Štětina, J.; Sekanina, B.
    • Year: 2013
    • Source: Energy transformations in industry. 13th international scientific conference. Košice: TU Košice, 2013. p. 69-72. ISBN: 978-80-553-1476-1

  • Mletí a sypné vlastnosti netypických dřevinových plniv

    • Authors: Svěrák, T.; Kejík, P.; Slanina, O.; Krištof, O.; Sikorová, K.; Fekete, R.
    • Year: 2013
    • Source: Sborník CHISA 2013. 1. Srní: ČSCHI, 2013. s. B2.5- 1 (B2.5-10 s.) ISBN: 978-80-02-02500-9

  • Impingement flux uniformity in nozzle spraying for industrial applications

    • Authors: Tseng, A.; Raudenský, M.; Li, B.
    • Year: 2013
    • Source: Atomization and sprays, 2013, vol. 23, no. 9, p. 819-840. ISSN: 1044-5110

  • Water jet interaction from adjacent high pressure descaling nozzles

    • Authors: Pohanka, M.; Raudenský, M.; Hwang, J.; You, J.; Lee, S.
    • Year: 2013
    • Source: Vodní paprsek 2013. Ostrava: Ústav geoniky AV ČR, 2013. p. 179-187. ISBN: 978-80-86407-43-2

  • Control of slab solidification in continuous casting process via optimization and numerical models

    • Authors: Mauder, T.; Štětina, J.; Raudenský, M.
    • Year: 2013
    • Source: The 24th International Symposium on Transport Phenomena Conference proceedings. Tokyo: Tokyo University of Science, 2013. p. 58-63

  • Influence of impact angle and pressure on spray cooling of vertically moving hot steel surfaces

    • Authors: Hnízdil, M.; Chabičovský, M.; Raudenský, M.
    • Year: 2013
    • Source: Program and book of abstracts, 21th Conference on Materials and Technology. Ljubljana, Slovenija: Institute of Metals and Technology, 2013. p. 85-85. ISBN: 978-961-92518-6-7

  • Techniques of Measurement of Spray Cooling Homogeneity

    • Authors: Chabičovský, M.; Raudenský, M.
    • Year: 2013
    • Source: Program and book of abstracts, 21th Conference on Materials and Technology. Ljubljana, Slovenija: Institute of Metals and Technology, 2013. p. 58-58. ISBN: 978-961-92518-6-7

  • Development of accelerated cooling for new plate mill

    • Authors: Raudenský, M.; Horský, J.; Lee, P.
    • Year: 2013
    • Source: Ironmaking and Steelmaking, 2013, vol. 40, no. 8, p. 598-604. ISSN: 0301-9233

  • Experimental investigation of stabilization of flowing water temperature with a water-PCM heat exchanger

    • Authors: Charvát, P.; Štětina, J.; Pech, O.; Klimeš, L.; Ostrý, M.; Hejčík, J.
    • Year: 2013
    • Source: Proceedings of the International conference Experimental Fluid Mechanics 2013. Kutná hora: 2013. p. 312-315. ISBN: 978-80-260-5375-0

  • Experimental Study of Interfacial Heat Flux and Surface Temperature by Inverse Analysis with Thermocouples (fuly embedded) during Hot Steel Strip Rolling

    • Authors: Weisz-Patrault, D.; Legrand, N.; Labbe, N.; Horský, J.; Luks, T.; Ehrlacher, A.
    • Year: 2012
    • Source: Advanced Materials Research, 2012, vol. 452- 453, no. 3, p. 959-963. ISSN: 1022-6680

  • Analysis of roll gap heat transfers in hot steel strip rolling through roll temperature sensors and heat transfer models

    • Authors: Legrand, N.; Labbe, N.; Weisz-Patrault, D.; Ehrlacher, A.; Luks, T.; Horský, J.
    • Year: 2012
    • Source: Key Engineering Materials (print), 2012, vol. 504- 506, no. 2, p. 1043-1048. ISSN: 1013-9826

  • Low Cost Membrane Contactors Based on Hollow Fibres

    • Authors: Raudenský, M.; Veselý, T.; Dohnal, M.
    • Year: 2012
    • Source: EPJ Web of Conferences, 2012, vol. 25, no. 4, p. 01009-p. 1 (01009-p.10 p.) ISSN: 2100-014X

  • Nozzle cooling of hot surfaces with various orientations

    • Authors: Luks, T.; Ondrušková, J.; Horský, J.
    • Year: 2012
    • Source: EPJ Web of Conferences, 2012, vol. 25 (2012), no. 4, p. 01063-p. 1 (01063-p.10 p.) ISSN: 2100-014X

  • Experimental investigation of heat transfer between hot air nozzle flow and cylinder

    • Authors: Zahradník, R.; Kotrbáček, P.; Boháček, J.
    • Year: 2012
    • Source: EPJ Web of Conferences, 2012, vol. 25, no. 4, p. 01102-p. 1 (01102-p.6 p.) ISSN: 2100-014X

  • Water chamber geometry and stabilizer construction effect on water pressure distribution of high pressure descaling nozzles

    • Authors: Kvapil, J.; Hrabovský, J.; Pohanka, M.
    • Year: 2012
    • Source: EPJ Web of Conferences, 2012, vol. 25 (2012), no. 4, p. 01076-p. 1 (01076-p.11 p.) ISSN: 2100-014X

  • Influence of Water Temperature on Heat Transfer Coefficient in Spray Cooling of Steel Surfaces

    • Authors: Chabičovský, M.; Raudenský, M.; Hnízdil, M.
    • Year: 2012
    • Source: ENGINEERING MECHANICS 2012. Svratka: J. Náprstek, C. Fischer, 2012. p. 126-127. ISBN: 978-80-86246-39-0

  • The Study of Polymeric Hollow Fiber Heat Exchangers

    • Authors: Astrouski, I.; Raudenský, M.
    • Year: 2012
    • Source: Engineering Mechanics 2012. Svratka: 2012. p. 47-57. ISBN: 978-80-86246-40-6

  • Influence of Water Temperature on the Cooling Intensity during Continuous Casting and Hot Rolling

    • Authors: Hnízdil, M.; Raudenský, M.
    • Year: 2012
    • Source: Conf. proceeding METAL 2012. 1st Edition 2012. Svratka: 2012. p. 1-6. ISBN: 978-80-87294-29-1

  • Plastic Heat Exchangers and Natural Compound Treatments

    • Authors: Astrouski, I.; Raudenský, M.; Dohnal, M.
    • Year: 2012
    • Source: Lodz, Poland: Bio-Tech Consulting Ltd., 2012. p. 52-53

  • Tailor – Made Flexible Plastic Heat Exchangers for Broad Spectrum of Biotechnologie

    • Authors: Astrouski, I.; Dohnal, M.; Raudenský, M.
    • Year: 2012
    • Source: Lodz, Poland: Bio-Tech Consulting Ltd., 2012. p. 52-53

  • Influence of The Water Chamber and Position of The Stabilizer on The Impact Pressure at High Pressure Descaling

    • Authors: Hrabovský, J.; Horský, J.
    • Year: 2012
    • Source: Conf. Porc. Metal 2012. 1st edition 2012. 2012 Tanger Ltd. Ostrava, 2012. p. 1-6. ISBN: 978-80-87294-29-1

  • Influence of Water Temperature on The Cooling Intensity of Mist Nozzles in Continuous Casting

    • Authors: Raudenský, M.; Hnízdil, M.; Hwang, J.; Lee, S.; Kim, S.
    • Year: 2012
    • Source: Materiali in tehnologije, 2012, vol. 46, no. 3, p. 311-315. ISSN: 1580-2949

  • Fuzzy Model of Relationship Among Economic Performance, Competitiveness and Business Ethics of Small and Medium-Sized Enterprises

    • Authors: Bočková, N.; Brož, Z.; Dohnal, M.
    • Year: 2012
    • Source: Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 2012, roč. 2012, č. 4, s. 71-78. ISSN: 1211-8516

  • Decision making in government tenders: A formalized qualitative model

    • Authors: Veselý, Š.; Dohnal, M.
    • Year: 2012
    • Source: Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis, 2012, vol. 60, no. 4, p. 397-406. ISSN: 1211-8516

  • Impact of Water Remains on a Hot Rolled Plate After Cooling

    • Authors: Zahradník, R.
    • Year: 2012
    • Source: MM Science Journal, 2012, vol. 2012, no. 7, p. 1-2. ISSN: 1805-0646

  • Optimization of working roll cooling in hot rolling

    • Authors: Horský, J.; Kotrbáček, P.; Kvapil, J.; Schoerkhuber, K.
    • Year: 2012
    • Source: 9th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics. 1. Malta: HEFAT, 2012. p. 685-690. ISBN: 978-1-86854-986-3

  • Thermal Load and Fatigue of Rolls in Hot Rolling

    • Authors: Horský, J.; Raudenský, M.; Luks, T.
    • Year: 2012
    • Source: 2012 AISTech Conference Proceedings. Atlanta (GA, U.S.A.): AISTech 2012, 2012. p. 2149-2157. ISBN: 978-1-935117-24-7

  • The Simulation of the Influence of Water Remnants on a Hot Rolled Plate After Cooling

    • Authors: Zahradník, R.
    • Year: 2012
    • Source: Acta Polytechnica, 2012, vol. 52, no. 4, p. 118-120. ISSN: 1210-2709

  • Ground stock changes under the dry mode of the ultra-fine grinding conditions

    • Authors: Števulová, N.; Eštoková, A.; Svěrák, T.
    • Year: 2012
    • Source: Praha: ČSCHI, 2012. p. 1364-1364. ISBN: 978-80-905035-1-9

  • Large Scale Capillary Based Plastic Heat Exchangers

    • Authors: Raudenský, M.; Dohnal, M.
    • Year: 2012
    • Source: CHISA 2012 - 20th International Congress of Chemical and Process Engineering and PRES 2012 - 15th Conference PRES. Chemical Engineering Transactions. Česká republika: AIDIC Servizi S.r. l, 2012. p. 1477-1482. ISBN: 978-88-95608-20- 4. ISSN: 1974-9791

  • Mechanochemistry changes of the calcium carbonate grinding stock under the dry mode of the ultra- fine grinding conditions

    • Authors: Svěrák, T.; Kejík, P.
    • Year: 2012
    • Source: CHoPS 2012, 7th International Conference for Conveying and Handling of Particulate Solids, 10. - 13. September 2012, Friedrichshafen/ Germany. Friedrichshafen: 2012. p. 1-10

  • Full Scale Measurements of Cooling Intensity and Homogeneity

    • Authors: Raudenský, M.; Horský, J.; Kotrbáček, P.
    • Year: 2012
    • Source: Quenching Control and Distortion. Ohio: ASM International, 2012. p. 124-133. ISBN: 978-1-61503-980-7

  • Changes of the Chemical Composition of Continuously Cast Steel Slab and their Relation to Breakout

    • Authors: Kavička, F.; Dobrovská, J.; Stránský, K.; Sekanina, B.; Štětina, J.; Mauder, T.
    • Year: 2012
    • Source: The 4th International Conference on Crack Paths (CP 2012). Book of Abstracts and CD. Parma, Italy: University of Parma, 2012. p. 89-89. ISBN: 9788895940441

  • Design of cooling units for heat treatment. In Heat treatment conventional and applications

    • Authors: Pohanka, M.; Kotrbáček, P.
    • Year: 2012
    • Source: Tech. Rijeka, Croatia: InTech, 2012. p. 1-20. ISBN: 978-953-51-0768-2

  • Experimental Studies of The Polymeric Hollow Fiber Heat Exchangers

    • Authors: Astrouski, I.; Raudenský, M.
    • Year: 2012
    • Source: 20th jubilee conference on materials and technology. Program and book of abstracts. 1. Ljubljana 2012: Institut za kovinske materiale in tehnologije, 2012. p. 35-35. ISBN: 978-961-92518-5-0

  • Experimental Invesigation of The Heat Transfer Coefficient

    • Authors: Chabičovský, M.; Raudenský, M.
    • Year: 2012
    • Source: Program and book of abstracts, 20th Conference on Materials and Technology. Ljubljana, Slovenija: Institute of Metals and Technology, 2012. p. 49-49. ISBN: 978-961-92518-5-0

  • Influence of the Rolling Loads on the Stress in the Roll Surface Layer

    • Authors: Zahradník, R.; Hrabovský, J.; Raudenský, M.
    • Year: 2012
    • Source: 20th jubilee conference on materials and technology. Program and book of abstracts. 1. Ljubljana: Insitute of Metals and Technology, 2012. p. 133-133. ISBN: 978-961-92518-5-0

  • Heat transfer of spray cooling using alumina/ water nanofluids with full cone nozzles

    • Authors: Bellerová, H.; Tseng, A.; Pohanka, M.; Raudenský, M.
    • Year: 2012
    • Source: HEAT AND MASS TRANSFER, 2012, vol. 48, no. 11, p. 1971-1983. ISSN: 0947-7411.

  • Vliv sypných vlastností partikulárních materiálů na jemnosti materiálu

    • Authors: Svěrák, T.; Zubek, P.; Fekete, R.
    • Year: 2012
    • Source: VII. konference s mezinárodrodnou účasťou Partikulárne látky vo vede, priemysle a životnom prostredí. Košice, Slovensko: TUKE Košice, 2012. s. 1-6. ISBN: 978-80-553-1211-8

  • Spray cooling by solid jet nozzles using alumina/ water nanofluids

    • Authors: Bellerová, H.; Tseng, A.; Pohanka, M.; Raudenský, M.
    • Year: 2012
    • Source: INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2012, vol. 62, no. 12, p. 127-137. ISSN: 1290-0729

  • Decision- Making on IPO Implementation under Conditions of Uncertainty

    • Authors: Mezulín, T.; Doubravský, K.; Dohnal, M.
    • Year: 2012
    • Source: Sborník vědeckých prací University Pardubice, 2012, vol. XVIII, no. 24, p. 124-136. ISSN: 1211-555X

  • Why oxides intensify spray cooling?

    • Authors: Raudenský, M.; Hnízdil, M.; Kotrbáček, P.
    • Year: 2012
    • Source: The 30th International Steel Industry Conference in Paris. 1. Paris: 2012. p. 92-93

  • Experimentální výzkum a numerická simulace procesu hydraulického odstraňování okují

    • Authors: Vavrečka, L.; Hrabovský, J.; Horský, J.
    • Year: 2011
    • Source: Hutnické listy, 2011, roč. LXIV, č. 2, s. 4-11. ISSN: 0018-8069

  • Algorithm for Calculation of Heat Transfer Coefficient of Cylindrical Bar Blown by Hot Air

    • Authors: Zahradník, R.; Kvapil, J.
    • Year: 2011
    • Source: Engineering mechanics 2011. Engineering mechanics. Svratka: Vladimír Fuis, 2011. p. 675-678. ISBN: 978-80-87012-33-8

  • Cooling Systems For Continous Galvanizing Line

    • Authors: Raudenský, M.; Pohanka, M.; Hnízdil, M.; Marmonier, F.
    • Year: 2011
    • Source: 20th Anniversary International Conference on Metallurgy and Materials - Metal 2011 - Conference Proceedings - Papers. 1. Brno: Tanger Ltd, 2011. p. 779-785. ISBN: 978-80-87294-24-6

  • Descaling by Pulsating Water Jet. In Thompson and Reuters

    • Authors: Hnízdil, M.; Raudenský, M.
    • Year: 2011
    • Source: Tanger spol. s r.o., 2011. p. 43-48. ISBN: 978-80-87294-17-8

  • Numerical Simulation of the High Pressure Hydraulic Descaling

    • Authors: Hrabovský, J.; Horský, J.
    • Year: 2011
    • Source: Thompson and Reuters. Tanger s.r.o., 2011. p. 95-100. ISBN: 978-80-87294-17-8

  • Spray cooling by multi- walled carbon nanotubes and Fe nanoparticles

    • Authors: Bellerová, H.; Pohanka, M.
    • Year: 2011
    • Source: Computtaional Methods And Experimental Measurements XV. UK: Witt Press, 2011. p. 293-304. ISBN: 978-1-84564-540-3

  • Biofouling of Flexible Plastic Heat Exchangers – Fuzzy Expert System

    • Authors: Gallik, R.; Raudenský, M.; Dohnal, M.; Horský, J.
    • Year: 2011
    • Source: Poster prezentovaný na konferenci Heat Exchanger Fouling and Cleaning - 2011. ICHMT, 2011. p. 1-9. ISBN: 978-961-92518-4-3

  • Feasible de Fouling Methods of Flexible Plastic Heat Exchangers

    • Authors: Dohnal, M.; Pollmannn, K.; Kutschke, S.; Guenther, T.; Horský, J.; Raudenský, M.
    • Year: 2011
    • Source: Conference Proceeding Heat Exchengers Fouling and Cleaning - 2011. 2011. p. 1-5. ISBN: 978-961-92518-4-3

  • Vliv přítomnosti termočlánku na okrajové podmínky přenosu tepla ocelových povrchů

    • Authors: Zahradník, R.
    • Year: 2011
    • Source: Power system engineering, thermodynamics & fluid flow. Sborník příspěvků. Plzeň: Západočeská univerzita v Plzni, 2011. s. 250-258. ISBN: 978-80-261-0004-1

  • Nonhomogeneous cooling effect on metallurgical structure of material

    • Authors: Ondroušková, J.; Pohanka, M.
    • Year: 2011
    • Source: Power System Engineering, Thermodynamics & Fluid Flow. 2011. p. 10-16. ISBN: 978-80-261-0004-1

  • Coupling of Solidification Model and Heat Transfer Coefficient to Have Valuable Tool for Slab Surface Temperature Prediction

    • Authors: Moravec, R.; Horský, J.; Blažek, K.; Graham, C.; Fiegle, S.; Dombovic, T.; Kaurich, T.
    • Year: 2011
    • Source: METEC 7th InSteelCon 2011. 2011. p. 1-9. ISBN: 978-961-92518-4-3

  • Research on cooling efficiences of water, emulsions and oil

    • Authors: Horák, A; Raudenský, M.; Pohanka, M.; Bellerová, H.; Reichardt, T.
    • Year: 2011
    • Source: Engineering Mechanics, 2011, vol. 18, no. 2, p. 81-89. ISSN: 1802-1484

  • Experimental Study of Heat Transfer For Cooling in Metallurgy

    • Authors: Horský, J.; Raudenský, M.
    • Year: 2011
    • Source: Tepelná technika v teorii a praxi. 2011. p. 57-69. ISBN: 978-80-248-2463-5

  • Controlled Cooling Simulation of Steel Strips

    • Authors: Horský, J.; Raudenský, M.; Kvapil, J.
    • Year: 2011
    • Source: Steel Strip 2011. 2011. p. 163-170. ISBN: 978-80-260-0539-1

  • Experimental investigation of heat transfer between hot air nozzle flow and cylinder

    • Authors: Zahradník, R.; Kotrbáček, P.; Boháček, J.
    • Year: 2011
    • Source: Experimental fluid Mechanics 2011. Proceedings of the International conference. Jičín: 2011. p. 1059-1064. ISBN: 978-80-7372-784-0

  • Nozzle cooling of hot surfaces with various orientations

    • Authors: Luks, T.; Ondrušková, J.; Horský, J.
    • Year: 2011
    • Source: Experimental fluid Mechanics 2011. Proceedings of the International conference. Jičín: 2011. p. 337-346. ISBN: 978-80-7372-784-0

  • Water chamber geometry and stabilizer construction effect on water pressure distribution of high pressure descaling nozzles

    • Authors: Kvapil, J.; Hrabovský, J.; Pohanka, M.
    • Year: 2011
    • Source: Experimental Fluid Mechanics 2011. Proceedings of the International conference. Jičín: 2011. p. 394-404. ISBN: 978-80-7372-784-0

  • Low Cost Membrane Contactors Based on Hollow Fibres

    • Authors: Raudenský, M.; Veselý, T.; Dohnal, M.
    • Year: 2011
    • Source: Experimental Fluid Mechanics 2011. Jičín: 2011. p. 590-599. ISBN: 978-80-7372-784-0

  • Influence of Water Temperature on Cooling Intensity of Mist Nozzles in Continuous Casting

    • Authors: Raudenský, M.; Hnízdil, M.; Lee, S.; Kim, S.; Hwang, J.
    • Year: 2011
    • Source: 19th Conference on Materials and Technology. Ljubljana 2011: 2011. p. 60-70. ISBN: 978-961-92518-4-3

  • Water impact measurement of two overlapping high pressure flat jet nozzles using two different methods

    • Authors: Kvapil, J.; Pohanka, M.
    • Year: 2010
    • Source: Proc. Engineering Mechanics 2010, 10.-13. May 2010, ISBN 978-80-87012-26-0

  • Cooling efficiency of flat jet nozzles versus full cone nozzles on working roll

    • Authors: Slabáková, J.; Pohanka, M.
    • Year: 2010
    • Source: Proc. Engineering Mechanics 2010, 10.-13. May 2010, ISBN 978-80-87012-26-0

  • Descaling by Pulsating Water Jet

    • Authors: Hnízdil, M.; Raudenský, M.
    • Year: 2010
    • Source: Proc. Metal 2010, May 2010, ISBN 978-80-87294-15-4

  • Numerical Simulation of the High Pressure Hydraulic Descaling

    • Authors: Hrabovský, J.; Horský, J.
    • Year: 2010
    • Source: Proc. Metal 2010, May 2010, ISBN 978-80-87294-15-4

  • Spray cooling by water based nanofluids with Al2O3 and TiO2

    • Authors: Bellerová, H.; Pohanka, M.; Raudenský, M.; Tseng, A.
    • Year: 2010
    • Source: Proc. ITHERM2010, June 2-5,2010, Las Vegas, USA, ISBN 978-1-4244-5343-6, ISSN 1087-9870, ISBN 978-1-4244-5343-6

  • Surface Tension Model for High Viscosity Ratios implemented in VOF model

    • Authors: Boháček, J.
    • Year: 2010
    • Source: Proc. ILASS – Europe 2010, 23rd Annual Conference on Liquid Atomization and Spray Systems, Sept. 2010, pp. 51-52, Brno, Czech Republic, ISBN 978-80-7399-997-1

  • Interstand Cooling – Design, Control and Experience

    • Authors: Raudenský, M.; Horský, J.; Hajduk, D.; Čecho, L.
    • Year: 2010
    • Source: Journal of Metallurgical and Mining Industry, 2010, Vol.2, No.3, pp. 193-202, ISSN 2075-0507(Print), ISSN 2078-8312 (Online)

  • Numerical Study of Droplet Dynamics Impinging onto Steel Plate Covered with Scale Layer

    • Authors: Boháček, J.; Horák, A.
    • Year: 2010
    • Source: Frontiers of Mechanical Engineering, Dec. 2010, Vol 5, No 4, p. 389-398, ISSN 1673-3479

  • Research on Cooling Efficiencies of Water, Emulsions, and Oil

    • Authors: Horák, A; Raudenský, M.; Pohanka, M.; Bellerová, H.; Reichardt, T.
    • Year: 2010
    • Source: Journal of Metallurgical and Mining Industry, 2010, Vol. 2, No.4, pp. 271-278, ISSN 2076-0507

  • In-Line Heat Treatment and Hot Rolling

    • Authors: Hnízdil, M.; Raudenský, M.; Horský, J.; Kotrbáček, P.; Pohanka, M.
    • Year: 2010
    • Source: Proc. AMPT 2010, October 24-27, 2010, pp. 178-179, Paris, France

  • New Cooling Techniques to Enhance Roll Bite Lubrication, Lower Water Usage and Decrease Energy Consumption on Cold Strip Mills

    • Authors: Legrand, N.; Borean, J.; Cuel-Oller, A.; Munz, J.; Uijtdebroek, H.; Montmitonnet, P.; Bouache, T.; Perez, J.; Horský, J.
    • Year: 2010
    • Source: Proc. 10th International Steel Rolling Conference, 2010, pp. 1-11, Beijing, China

  • Leidenfrost Phenomena at Hot Sprayed Surface

    • Authors: Raudenský, M.; Boháček, J.
    • Year: 2009
    • Source: The 7th ECI International Conference on Boiling Heat Transfer Boiling 2009, 3-7 May 2009, Florianopolis, Brazil

  • Interstand Cooling – Design, Control and Experience

    • Authors: Raudenský, M.; Horský, J.; Hajduk, D.; Čecho, L.
    • Year: 2009
    • Source: The 5th European Rolling Conference, 23-25 June 2009, London, UK

  • Modelling of Cooling and Thermal Load of Rolls in Hot Rolling

    • Authors: Kotrbáček, P.; Pohanka, M.; Horský, J.; Raudenský, M.
    • Year: 2009
    • Source: The 3rd STEELSIM Conf., 8-9 Sept.2009, Leoben, Austria

  • Intensification of Roll Cooling in Hot Rolling with a Roll Wiper

    • Authors: Van Steden, H.; Boháček, J.; Kotrbáček, P.; Raudenský, M.
    • Year: 2009
    • Source: Research Disclosure Journal, Oct. 2009, ISSN 0374-4353

  • Modelling of a Free-Falling Water Droplet, Handicap of CSF Approach and Its Improvement Design

    • Authors: Boháček, J.
    • Year: 2009
    • Source: Proc. Water Jet 2009, 4-5 Nov.2009, ISBN 978-80-86407-81-4

  • Experimental Technique for Heat Transfer Measurements on Fast moving Sprayed Surfaces

    • Authors: Pohanka, M.; Bellerová, H.; Raudenský, M.
    • Year: 2009
    • Source: Journal of ASTM International, Vol.6, No.4, 2009, pp. 1-9

  • Inter Stand Cooling in Hot Strip Mill

    • Authors: Hajduk, D.; Šimeček, P.; Raudenský, M.
    • Year: 2008
    • Source: The 17th Rolling Conference, Rosario, Argentina, November 10-13, 2008

  • Modification of Billet Continuous Casting Machine from Square to Round Geometry

    • Authors: Kotrbáček, P.; Horský, J.; Boháček, J.
    • Year: 2008
    • Source: The 6th European Conference on Continuous Casting 2008, 3-6 June 2008, Riccione, Italy, ISBN 88-85298-65-6

  • Influence of Interface Oxidation on Transmission Laser Bonding of Wafers for Microsystem Packaging

    • Authors: Tseng, A.; Park, J.; Vakanas, G.; WU, H.; Raudenský, M.; Chen, T.
    • Year: 2007
    • Source: Microsystem Technologies, Vol. 13, No. 1 January 2007, pp. 49-59, ISSN 0946-7076.

  • Hydraulic Descaling Improvement, Findings of Jet Structure on Water Hammer Effect

    • Authors: Raudenský, M.; Horák, A.; Horský, J.; Pohanka, M.; Kotrbáček, P.
    • Year: 2007
    • Source: La Revue de Métallurgie, February 2007, ISSN 0035-1563(print edition), ISSN 1156-3141, pp. 84-90

  • Cooling of Rolls in Hot Rolling of Long Products

    • Authors: Raudenský, M.; Horský, J.; Pohanka, M.; Kotrbáček, P.
    • Year: 2007
    • Source: Int. conf. Rolls 4 2007, Birmingham, UK, March 14-16, 2007

  • High – Speed Droplet Impact During Hydraulic Descaling Process

    • Authors: Horák, A.; Boháček, J.
    • Year: 2007
    • Source: IM 2007, Svratka, Czech Republic, May 14-17, 2007, ISBN 978-80-87012-06-2

  • Influence of Coolant Type on Cooling Spray Intensity

    • Authors: Horák, A; Bellerová, H.
    • Year: 2007
    • Source: IM 2007, Svratka, Czech Republic, May 14-17, 2007, ISBN 978-80-87012-06-2

  • Image Analysis of Water Jet

    • Authors: Boháček, J.; Hnízdil, M.
    • Year: 2007
    • Source: IM 2007, Svratka, Czech Republic, May 14-17, 2007, ISBN 978-80-87012-06-2

  • Limitation of Thermal Inverse Algorithm and Boundary Conditions Reconstruction for Very Fast Changes on Boundary

    • Authors: Pohanka, M.
    • Year: 2007
    • Source: IM 2007, Svratka, Czech Republic, May 14-17, 2007, ISBN 978-80-87012-06-2

  • Optimization of Calibrated Shaped Rolls

    • Authors: Pohanka, M.; Horský, J.; Juriga, J.; Petruška, J.
    • Year: 2007
    • Source: 16th Metalurgical and Materials Conference METAL 2007, Hradec n/Moravicí, Czech Republic, May 22-24, 2007

  • Experimental Study of Hydraulic Descaling

    • Authors: Horský, J.; Raudenský, M.; Vavrečka, L.
    • Year: 2007
    • Source: 5th International Conference HEFAT 2007, Sun City, South Africa, July 1-4, 2007, ISBN: 978-86854-6435

  • Hydraulic Descaling and Roll Cooling

    • Authors: Raudenský, M.
    • Year: 2007
    • Source: Conference of POSCO, Pohang, Korea, August 30.-31., 2007

  • Inverse Algorithms for Time Dependent Boundary Reconstruction of Multidimensional Heat Conduction Model

    • Authors: Pohanka, M.; Horský, J.
    • Year: 2007
    • Source: The seminar of Thermophysics 2007, Kočovce, Slovakia, October 11-12, 2007, ISBN 978-80-227-2746-4

  • Vliv ostřikových parametrů na Leidenfrostovou teplotu a intenzitu přenosu tepla v úseku sekundárního chlazení ZPO

    • Authors: Morávka, J.; Kuběna, J.; Horský, J.; Vavrečka, L.
    • Year: 2006
    • Source: Sborník přednášek 22. celostátní konference se zahraniční účastí Teorie a praxe výroby a zpracování oceli, Rožnov pod Radhoštěm. Ostrava: Tanger a MARQ, 4.-5.4.2006, p. 133-139. ISBN 80-86840-15-8

  • Závislost Leidenfrostovy teploty a HTC na parametrech ostřiku u vodních trysek

    • Authors: Morávka, J.; Kuběna, J.; Raudenský, M.; Horák, A.
    • Year: 2006
    • Source: Sborník přednášek 15. mezinárodní konference metalurgie a materiálů METAL 2006. Ostrava: Tanger, 23.-25.5.2006, referát č. 86, 8 s. ISBN 80-86840-18-2

  • Estimation of discretization error in time and space domain of numerical heat conduction

    • Authors: Pohanka, M.
    • Year: 2006
    • Source: Engineering Mechanics 2006. Svratka (Czech Republic), 2006, pp. 288–289. ISBN 80-86246-27-2

  • Intensification and Control of Roll Cooling

    • Authors: Raudenský, M.; Horský, J.; Kotrbáček, P.
    • Year: 2006
    • Source: Int. conf. Steel Rolling 2006. Paris, June 19-21, 2006

  • Spray Cooling of Rotating Roll

    • Authors: Raudenský, M.; Horský, J.; Kotrbáček, P.
    • Year: 2006
    • Source: 13th International Heat Transfer Conference, Sydney, August 13-18, 2006, ISBN 1-56700-226-9

  • Control of ISC on Hot Strip Mill

    • Authors: Hajduk, D.; Horský, J.; Raudenský, M.
    • Year: 2006
    • Source: 7th International Conference Steel Strip 2006, Přerov, October 4-6, 2006, ISBN 80-239-7750-4

  • Experimental Study of Heat Transfer in Hot Rolling

    • Authors: Horský, J.; Raudenský, M.; Vavrečka, L.
    • Year: 2006
    • Source: 16th Rolling Conference, Buenos Aires, Argentina, November 6-9, 2006

  • Ejector Type Cooling Nozzle

    • Authors: Boháček, J.
    • Year: 2006
    • Source: Experimental Fluid Mechanics 2006, December 6-7, 2006, Liberec, Česká republika, ISBN 80-7372-141-4

  • Hydraulic Descaling Improvement – Findings of jet Structure on Water Hammer Effect

    • Authors: Raudenský, M.; Horák, A.; Horský, J.; Pohanka, M.; Kotrbáček, P.
    • Year: 2006
    • Source: ATS – JSI, Paris 14 – 15 December 2006, p. 34-35.

  • Hydraulic Descaling Improvement – Findings of jet Structure on Water Hammer Effect

    • Authors: Raudenský, M.; Horák, A.; Horský, J.; Pohanka, M.; Kotrbáček, P.
    • Year: 2006
    • Source: ATS – JSI, Paris 14 – 15 December 2006, pp. 34-35.

  • Experimental Study of Heat Transfer in Hot Rolling and Continuous Casting

    • Authors: Horský, J.; Raudenský, M.; Pohanka, M.
    • Year: 2005
    • Source: Materials Science Forum Vols. 473-474 (2005), Materials Science, Testing and Informatics II, ISSN 0255-5476, ISBN0-87849-957-1, Trans Tech Publications, Switzerland

  • Secondary Cooling in Continuous Casting and Leidenfrost Temperature

    • Authors: Raudenský, M.; Horský, J.
    • Year: 2005
    • Source: Ironmaking and Steelmaking Vol 32, No. 2 (2005), DOI 10.1179/174328105X15913, Maney, UK

  • Experimental Study of Semi-Solid Steel Deformation

    • Authors: Horský, J.; Kotrbáček, P.; Petruška, J.; Řídký, R.
    • Year: 2005
    • Source: International Journal of Forming Processes, Vol. 8- No. 1/2005, p. 63 – 75, ISSN 1292-7775, ISBN 2-7462-1163-7, Lavoisier, 2005

  • Measurement of Heat Transfer Characteristics of Secondary Cooling in Continuous Casting

    • Authors: Horský, J.; Raudenský, M.
    • Year: 2005
    • Source: 14th International Metallurgical & Materials Conference, Metal 2005 May 24-26, 2005, Hradec n/Moravicí, CR, ISBN 80-86840-13-1

  • Heat Transfer Study of secondary cooling in Continuous Casting

    • Authors: Horský, J.; Raudenský, M.
    • Year: 2005
    • Source: AISTech 2005, Iron & Steel technology Conference and exposition, May 9-12, 2005, Charlotte, USA

  • Simulation Of Thermal Behaviour Of Rolls In Rolling

    • Authors: Horský, J.; Vavrečka, L.; Pohanka, M.
    • Year: 2005
    • Source: 1st International Conference on Simulation and Modelling of Metalurgical Processes in Steelmaking, 25 - 27 October 2005, Brno, Czech Republic

  • Optimisation Of Controlled Cooling in Continuous Casting

    • Authors: Raudenský, M.; Horák, A.; Kotrbáček, P.
    • Year: 2005
    • Source: 1st International Conference on Simulation and Modelling of Metalurgical Processes in Steelmaking, 25 - 27 October 2005, Brno, Czech Republic

  • Cooling in Hot Rolling

    • Authors: Raudenský, M.; Horský, J.
    • Year: 2005
    • Source: 4th International Conference Therm Tech Form 2005, (Tale, Slovak Republic, September 5-8, 2005). Košice: Acta Metallurgica Slovaca, 2/2005, 11, p. 301-308, ISSN 1355-1532

  • Experimental Study of Semi-Solid Steel Deformation

    • Authors: Kotrbáček, P.; Horský, J.; Raudenský, M.
    • Year: 2005
    • Source: 4th International Conference Therm Tech Form 2005, (Tale, Slovak Republic, September 5-8, 2005). Košice: Acta Metallurgica Slovaca, 2/2005, 11, p. 334-339, ISSN 1355-1532

  • Computational and Experimental Analysis of Thermal Stresses in Grooved Roll

    • Authors: Vavrečka, L.; Petruška, J.; Horský, J.
    • Year: 2005
    • Source: Engineering Mechanics 2005, May 9-12, 2005, Svratka, Czech Republic, ISBN.80-85918-93-5

  • Influence of Surface Roughness on Spray Cooling Intensity in High Temperature Applications

    • Authors: Horák, A.; Střítecký, P.
    • Year: 2005
    • Source: Engineering Mechanics 2005, May 9-12, 2005, Svratka, Czech Republic, ISBN.80-85918-93-5

  • Optimalizace chlazení hutních válců – výpočtová a experimentální analýza teplotní napjatosti ve tvarových válcích

    • Authors: Kotrbáček, P.; Horský, J.; Vavrečka, L.
    • Year: 2005
    • Source: Kalibrace válců 2005, prac. seminář, 15.- 16. června 2005, Čeladná

  • Experimental Study of Heat Transfer in Hot Rolling

    • Authors: Kotrbáček, P.; Horský, J.; Raudenský, M.; Pohanka, M.
    • Year: 2005
    • Source: Revue de Metallurgie, 4e trimestre 2005, p. 42-43, ISBN 2-911212-05-3

  • Indentation and Piercing of Steel in a Mushy State

    • Authors: Horský, J.; Raudenský, M.; Kotrbáček, P.; Tseng, A.
    • Year: 2005
    • Source: ASM International, Journal of Materials Engineering and Performance, Vol. 14, No. 5, 2005, p. 610-614, ISSN 1059-9495

  • Intensification of Roll Cooling Using a Two-level Pressure System

    • Authors: Horský, J.; Raudenský, M.; Tseng, A.
    • Year: 2004
    • Source: AISTech 2004 – Iron and Steel Conference and Exposition, September 15/17, 2004, Nashville, USA, ISBN 1-886362-76-9, ISSN 1551-6997

  • Controlled Cooling in Continuous Casting

    • Authors: Raudenský, M.; Horský, J.; Kotrbáček, P.
    • Year: 2004
    • Source: 3rd International Conference on Continuous Casting of Steel in developing Countries CCC`04, September 14-17, 2004, Beijing, China, ISSN 0449-749X, CN11-2118/TF

  • Influence of Parameters of Hydraulic Descaling on Temperature Losses and Surface Quality of Rolled Material

    • Authors: Kotrbáček, P.; Horský, J.; Raudenský, M.; Pohanka, M.
    • Year: 2004
    • Source: 10th International Conference Metal Forming 2004, September 19-22, 2004, Krakow, Poland, ISBN 3-937057-08-0, ISSN 1619-9529

  • Various Plastometric Tests for Semi Solid Materials and Their Numerical Simulations

    • Authors: Zmudzki, A.; Pietrzyk, M.; Kotrbáček, P.; Horský, J.
    • Year: 2004
    • Source: 10th International Conference Metal Forming 2004, September 19-22, 2004, Krakow, Poland, ISBN 3-937057-08-0, ISSN 1619-9529

  • Comparison of Water and Oil Nozzle Cooling Intensity

    • Authors: Horský, J.; Raudenský, M.
    • Year: 2003
    • Source: 2nd International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics – HEFAT 2003, June 23-25, 2003, Victoria falls, Zambia, ISBN: 0-620-30503-7

  • Experimental Study of Semi-Solid Steel Deformation

    • Authors: Řídký, R.; Petruška, J.; Horský, J.; Kotrbáček, P.
    • Year: 2003
    • Source: Engineering Mechanics 2003, National Conference with International Participation, May 12-15, 2003, Svratka , Czech Republic, ISBN 80-86246-18-3

  • A Downhill Simplex method for computation of interfacial heat transfer coefficients in alloy casting

    • Authors: Pohanka, M.; Woodbury, K.
    • Year: 2003
    • Source: INVERSE PROBLEMS IN ENGINEERING, 2003, vol. 11, no. 5, p. 409-424. ISSN: 1068-2767

  • Identification of Semisolid Steel Behaviour

    • Authors: Petruška, J.; Řídký, R.; Horský, J.; Kotrbáček, P.
    • Year: 2003
    • Source: 20th Danubia-Adria Sympozium on Experimental Methods in Solid Mechanics, September 24-27,2003, Gyor, Hungary

  • Indentation and Piercing of Steel in Mushy State

    • Authors: Horský, J.; Raudenský, M.; Kotrbáček, P.; Tseng, A.
    • Year: 2003
    • Source: Journal of the Chinese Society of Mechanical Engineers, Vol.24, No. 3, pp.187-195, 2003

  • Experimental Study of Leidenfrost Phenomena at Hot Sprayed Surface

    • Authors: Raudenský, M.; Horský, J.; Dumek, V.; Kotrbáček, P.
    • Year: 2003
    • Source: Proceedings of 2003 ASME Summer Heat Transfer Conference, July 21-23, 2003, Las Vegas, Nevada, USA, HT2003-47585

  • Two-Dimensional Correction of Data measured Using a Large Pressure Sensor

    • Authors: Pohanka, M.
    • Year: 2003
    • Source: 11th International Conference on Computational Methods and Experimental Measurements (CMEM 2003), May 12-14, 2003, Halkidiki, Greece, ISBN 1-85312-969-0, ISSN 1466-7266

  • Experimental Study of Parameters Influencing Efficiency of Hydraulic Descaling

    • Authors: Raudenský, M.; Horský, J.; Pohanka, M.; Tošovský, J.; Kotrbáček, P.
    • Year: 2003
    • Source: 4th International Conference on Hydraulic Descaling, April 7-8, 2003, 1Carlton House Terrace, London, UK, pp. 29-38, Reg. Charity No.: 1059475

  • Využití programového systému Ansys pro modelování chování vrstvy okují při procesu hydraulického odkujení

    • Authors: Tošovský, J.
    • Year: 2003
    • Source: ANSYS Users´Meeting, 25.-26. září 2003, Znojmo, ČR

  • Experimental Study of Thermal Processes in Hydraulic Descaling

    • Authors: Raudenský, M.; Horský, J.
    • Year: 2002
    • Source: 1st international conf. Hefat 2002, April 8-10, 2002, Skuruza – Kruger National Park, South Africa, pp. 1015-1018, ISBN: 0-86970-536-9

  • Determination of Heat Resistance between Installed Thermocouple and Body Used for Computing Heat Transfer Coefficients

    • Authors: Pohanka, M.; Raudenský, M.
    • Year: 2002
    • Source: Inženýrská mechanika 2002, Svratka, Czech republic, May 13-16, 2002, pp. 227-228, ISBN 80-214-2109-6

  • Stress Analysis of Scale Layer for Descaling Process

    • Authors: Tošovský, J.; Pohanka, M.; Kotrbáček, P.
    • Year: 2002
    • Source: 40 th International Conference on Experimental Stress Analysis, June 3-6, 2002, Prague, Czech Republic

  • Obtaining Temperature Dependent Thermal Properties of Investment Casting Mold

    • Authors: Pohanka, M.; Woodbury, K.; Wolley, J.
    • Year: 2002
    • Source: IMECE 2002 – International Mechanical Engineering Congress and Exposition, November 2002, New Orleans, LA

  • Optimal Cooling of Rolls in Hot Rolling

    • Authors: Raudenský, M.; Horský, J.; Pohanka, M.
    • Year: 2002
    • Source: 9th International Conference on Metal Forming 2002-12-19, September 9-11, 2002, The University of Birmingham, UK, S0924-0136(02)00496-X.

  • Secondary Cooling in Continuous Casting

    • Authors: Raudenský, M.; Horský, J.; Šarler, B.
    • Year: 2002
    • Source: 4th European Continuous Casting Conference, October 14-16. 2002, Birmingham, UK, 1059475

  • Combined Inverse Heat Conduction Method for Highly Transient Processes

    • Authors: Raudenský, M.; Horský, J.; Pohanka, M.
    • Year: 2002
    • Source: International Conference on Heat Transfer 2002, April 22-24, 2002, Halkidiki, Greece, ISBN: 1-85312-9062, ISSN: 1462-6063

  • Mechanical characteristics of semisolid steels

    • Authors: Tseng, A.; Horský, J.; Raudenský, M.; Kotrbáček, P.
    • Year: 2001
    • Source: Interactive Dynamics of Convection and Solidification. Netherlands: Springer Netherlands, 2001. pp. 99-112. ISBN: 978-90-481-5719-8

  • Deformation Behavior of Steel in Mushy State

    • Authors: Tseng, A.; Horský, J.; Raudenský, M.; Kotrbáček, P.
    • Year: 2001
    • Source: Materials and Designs 22 (2001) 83-92, 2000 Elsevier Science Ltd., S0261-306900058-3

  • Hydraulic Descaling of Primary and secondary Scale

    • Authors: Raudenský, M.; Horský, J.; Kotrbáček, P.
    • Year: 2001
    • Source: 6th conference Steel Strip 2001, Rožnov/Radhoštěm, Czech Republic, September 25-26,2001, pp. 393 –399

  • Deformation Characteristics of Semi-Solid Steel

    • Authors: Raudenský, M.; Horský, J.; Kotrbáček, P.
    • Year: 2001
    • Source: 4th international conference on Continuous Casting of Billets, Třinec, Czech Republic, October31 – November1, 2001, p

  • Deformation Behavior Of Steels In Mushy State

    • Authors: Horský, J.; Raudenský, M.; Kotrbáček, P.; Tseng, A.
    • Year: 2000
    • Source: Sympozium on Thermo-Mechanical Processing of Materials, ASME-MED, 2000 – International Mechanical Engineering Congress and Exposition (IMECE).

  • Attainment of more precise parameters of a mathematical model for cooling flat and cylindrical hot surfaces by nozzles

    • Authors: Pohanka, M.; Raudenský, M.; Horský, J.
    • Year: 2000
    • Source: 6th International Conference on Advanced Computational Methods in Heat Transfer – Heat Transfer 2000, June 2000, Madrid Spain, pp. 627-635, ISBN: 1-85312-818-X

  • Experimental Study of Thermal Processes in Hydraulic Descaling

    • Authors: Raudenský, M.; Horský, J.
    • Year: 2000
    • Source: 3rd International Conference on Hydraulic Descaling, 14 –15 September 2000, The Society of Chemical Industry, London, UK

  • Experimental Study of Steel Behaviour in Process of Mushy State Deformation

    • Authors: Kotrbáček, P.; Raudenský, M.; Horský, J.; Řídký, R.
    • Year: 2000
    • Source: 8th International Conference on Metal Forming 2000, 3 - 7 September 2000, Krakow, Poland, ISBN: 90-5809-1570

  • Experimentální výzkum chlazení válců a provalků při válcování za tepla

    • Authors: Raudenský, M.; Horský, J.
    • Year: 2000
    • Source: vědecko-technická konference Valcovanie plechov za tepla,, Vysoké Tatry – Stará Lesná, 9. –11. října 2000, Slovensko

  • An Interdisciplinary Approach Towards Optimal Continouos Casting Of Steel

    • Authors: Šarler, B.; Filipič, M.; Raudenský, M.; Horský, J.
    • Year: 2000
    • Source: Conf. Materials processing in the computer Age, USA, p. 27 –36, 2000, 0-87339-467-4

  • Deformation behavior of Steel in Mushy State

    • Authors: Tseng, A.; Horský, J.; Raudenský, M.; Kotrbáček, P.
    • Year: 2000
    • Source: Euromech Colloquium 408, 18-22 March 2000, Chamonix, France

  • Descaling with High Pressure Nozzles

    • Authors: Bendig, L.; Raudenský, M.; Horský, J.
    • Year: 2000
    • Source: ILASS – Europe 2001, Zurich, 2-6 September 2001

  • Experimental Study of Heat Transfer with Reference to Numerical Simulations in Hot Rolling

    • Authors: Horský, J.; Raudenský, M.; Zela, L.
    • Year: 1999
    • Source: The 7th International Conference on Steel Rolling, Makuhari, Chiba, Japan, proc. published by The Iron and Steel Institute of Japan, pp. 216-220, 1999

  • Measurement of Heat Transfer Coefficients of Spray Nozzles for Roll Cooling and their Application in Mathematical Modelling

    • Authors: Bendig, L.; Raudenský, M.; Horský, J.
    • Year: 1999
    • Source: ROLLS 2000 + “Advances in Mill Roll Technology”, International Convention Centre Birmingham, UK, conference paper, 1999

  • How to Precisely Define Computational Models of Heat Process with Experimental Setting under Marginal Conditions

    • Authors: Pohanka, M.; Raudenský, M.; Horský, J.; Druckmüller, M.
    • Year: 1999
    • Source: National Conference, Svratka, Czech Republic, published by Inženýrská mechanika 99, p. 717-722, ISBN 80-214-1323-9

  • Thermal and Mechanical Effect of High Pressure Spraying of Hot Surface

    • Authors: Raudenský, M.; Horský, J.; Telecký, L.
    • Year: 1999
    • Source: 3rd International Metallurgical Conference -Proceedings Continuous Casting of Billets, Třinec, Czech Republic, 1999, pp. 217 – 221

  • Experimental Study of Solid-liquid Phase Changes in Binary System

    • Authors: Raudenský, M.; Horský, J.; Telecký, L.
    • Year: 1999
    • Source: COST P3 Simulation of Physical Phenomena in Technological Applications, General Workshop Dipoli, Espoo, Finland, poster,1999, ISBN 80-238-4606-X

  • Assessment of Strategies and Potential for Neural Networks in the Inverse Heat Conduction Problem

    • Authors: Krejsa, J.; Woodbury, A.; Ratliff, J.; Raudenský M.
    • Year: 1999
    • Source: Inverse Problems in Engineering, Vol 7, 1999, pp. 197-213, ISSN: 1068-2767

  • Usage of artificial intelligence methods in inverse problems for estimation of material parameters

    • Authors: Raudenský, M.; Horský, J.; Krejsa, J.; Sláma, L.
    • Year: 1998
    • Source: Int. J. of Numerical methods for Heat and Fluid Flow, Vol. 6, No. 8, pp. 19-30, 1998

  • Experimental Study of Long Product Cooling in Hot Rolling

    • Authors: Horský, J.; Raudenský, M.; Kotrbáček, P.
    • Year: 1998
    • Source: Journal of Material Processing Technology 80-81, (1998), pp. 337-340

  • Water Spray Cooling of Stainless and C-Mn Steel

    • Authors: Olden, V.; Raudenský, M.; Onsrud, K.; Hummel, W.
    • Year: 1998
    • Source: Steel Research 69, (1998), No. 6, pp. 240-246

  • Experimental Study of Steel Behaviour in Process of Mushy State Deformation

    • Authors: Kotrbáček, P.; Horský, J.; Raudenský, M.; Šarler, B.
    • Year: 1998
    • Source: 6th Konferencie o materialih in tehnologijah, Portorož, 1998

  • Inverse Heat Conduction Problems and Generalisation of Experimental Results

    • Authors: Raudenský, M.; Druckmüller, M.; Horský, J.
    • Year: 1998
    • Source: 1998 ASME International Mechanical Engineering Congress and Exposition, Anaheim, USA, Volume 5 – Numerical and Experimental Methods in Heat Transfer, pp. 65-72, ISBN 0-7918-1597-8

  • Experimental study of heat transfer with reference to numerical simulations in hot rolling

    • Authors: Horský, J.; Raudenský, M.; Zela, L.
    • Year: 1998
    • Source: STEEL ROLLING '98. Proceedings of the 7th International Con. Japan, Makuhari, Chiba: The Iron and Steel Institute of Japan, 1998. p. 216 ( p.)

  • Experimental Study of Steel Behaviour in Process of Mushy State Deformation

    • Authors: Horský, J.; Raudenský, M.; Kotrbáček, P.; Šarler, B.
    • Year: 1998
    • Source: Kovine Zlitine, Tehnologije 32, 1998, p. 497-502, ISSN 1318-0010

  • Evaluation of Quenching Test of Rotating Roll with Unknown Time Constant of Sensor Using Genetic Algorithm

    • Authors: Sláma, L.; Raudenský, M.; Horský, J.; Březina, T.; Krejsa, J.
    • Year: 1997
    • Source: Int. Conf. Mendel, Brno 7/97

  • Chlazení a tepelné deformace válců (Cooling and Thermal Deformations of Rolls)

    • Authors: Horský, J.; Raudenský, M.
    • Year: 1997
    • Source: 32. konference „Kalibrace válců“, Ostravice, Czech Rep., 1997, proc. pp. 40-45

  • Dynamic Quenching Tests of Steels and their Evaluation by Inverse Task

    • Authors: Horský, J.; Raudenský, M.
    • Year: 1997
    • Source: Computational Methods and Experimental Measurements VIII, Conf. May 1997, Grece, Computational Mechanics Publication, Southampton, pp. 611-622, ISBN 1-85312-463X

  • Experimental Study of Nozzle Cooling in Continuous Casting

    • Authors: Horský, J.; Raudenský, M.
    • Year: 1997
    • Source: 2nd International Conference Continuos Casting of Billets, Třinec, 1997, proc. pp. 107-116

  • Experimental Study of Steel Behaviour in the Process of Mushy State Deformation

    • Authors: Horský, J.; Raudenský, M.; Kotrbáček, P.
    • Year: 1997
    • Source: 2nd International Conference Continuos Casting of Billets, Třinec, 1997, proc. pp. 99-106

  • Odpory oceli 19 191 v polotekutém stavu proti vtlačování nástroje

    • Authors: Horský, J.; Kotrbáček, P.; Raudenský, M.
    • Year: 1997
    • Source: 3rd Int. Conf. Akademická Dubnica 97, Slov. Tech. University, Dubnica, Slovakia, 1997, proc. pp. 117-121

  • Thermal Expansion and Crown Evaluations of Rolls in Rolling Processes

    • Authors: Tseng, A.; Tong, S.; Raudenský, M.; Chen, T.
    • Year: 1996
    • Source: Steel Research 67 (1996) No. 5, pp. 188-195

  • Mathematical Modelling and Experimental Study of Heat Transfer on Roll Cooled by Water Nozzles

    • Authors: Horský, J.; Raudenský, M.
    • Year: 1996
    • Source: 2nd. Int. Conf. Modelling of Metal Rolling Processes, London 1996, Proc. pp. 288-298

  • Exchange of Cooling of Work Rolls of Finishing Rolling Train

    • Authors: Čverčko, J.; Čecho, L.; Varga, .; Pavlík, .; Jaroš, M.; Raudenský, M.
    • Year: 1996
    • Source: Acta Metallurgica Slovaca 2, special issue 1996, pp. 37-43

  • Optimization of Cooling of Mettalurgiacal Rolls

    • Authors: Raudenský, M.; Horský, J.
    • Year: 1996
    • Source: Acta Metallurgica Slovaca 2, special issue 1996, pp. 44-49

  • Results of Experimental Research for Rolls Cooling on Rolling Mill

    • Authors: Raudenský, M.; Horský, J.
    • Year: 1996
    • Source: 5th Int. Conf. Steel Strip 96, Opava, pp. 191-196

  • Numerical Methods and Inverse Problems in Materials Science and Processing, Part 2: Inverse Problems

    • Authors: Raudenský, M.; Horský, J.; Krejsa, J.; Sláma, L.; Nowak, A.; Massoni, E.
    • Year: 1996
    • Source: MMSP 96 - General Workshop, Davos, 1996, Proceedings pp. 68-78

  • Non-classical Approach to the Inverse Problems

    • Authors: Raudenský, M.; Horský, J.; Krejsa, J.; Sláma, L.
    • Year: 1996
    • Source: MMSP 96 - General Workshop, Davos, 1996, Proceedings pp. 203-208

  • Mathematical Modelling and Experimental Study of Heat Transfer on Roll Cooled by Water Nozzles

    • Authors: Raudenský, M.; Horský, J.
    • Year: 1996
    • Source: 2nd. Int. Conf. Modelling of Metal Rolling Processes, London 1996, Proc. pp. 288-298

  • Chlazení pohybujících se povrchů s vysokými teplotami vodovzdušnými tryskami (Cooling of High Temperature Moving Surfaces by Mist Nozzles)

    • Authors: Raudenský, M.; Horský, J.; Sláma, L.
    • Year: 1996
    • Source: Conf. Inženýrská mechanika 96, Svratka, pp. 23-28

  • Dynamické vlastnosti termočlánků (Dynamics Features of Thermocouples)

    • Authors: Raudenský, M.; Horský, J.
    • Year: 1996
    • Source: Conf. Inženýrská mechanika 96, Svratka, pp. 81-86.

  • The Comparison of Traditional and Non-classical Methods Solving the Inverse Heat Conduction Problem

    • Authors: Krejsa, J.; Sláma, L.; Horský, J.; Raudenský, M.; Pátiková, B.
    • Year: 1996
    • Source: Int. Conf Advanced Computational Methods in Heat Transfer,. Udine, July 1996, pp. 451-460

  • An Inverse Finite Element Evaluation of Roll Cooling in Hot Rolling of Steels

    • Authors: Tseng, A.; Chang, W.; Raudenský, M.; Horský, J.
    • Year: 1995
    • Source: Journal of Materials Processing & Manufacturing Science, Vol. 3, April 1995, pp. 387-408

  • Usage of Neural Network for Coupled Parameter and Function Specification Inverse Heat Conduction Problem

    • Authors: Raudenský, M.; Horský, J.; Krejsa, J.
    • Year: 1995
    • Source: International Communications in Heat and Mass Transfer, 1995, Vol. 22, No. 5, pp. 661-670

  • Influence of Water Pressure on Cooling Intensity in Process of Quenching of Rotating Roll by Water Nozzle

    • Authors: Horský. J,; Raudenský, M.
    • Year: 1995
    • Source: Strojnícky časopis, 46, 1995, No.4, pp. 223-228, in Czech

  • Počítačová podpora tváření oceli v polotekutém stavu (CAD for Forming in Mushy Region)

    • Authors: Křešťák, T.; Raudenský, M.; Forejt, M.
    • Year: 1995
    • Source: 2nd International conference FORM, Brno 1995, pp. 66-70

  • Usage of Neural Network for Coupled Parameter and function Specification of Inverse Heat Conduction Problem

    • Authors: Raudenský, M.; Horský, J.; Krejsa, J.
    • Year: 1995
    • Source: HTD-Vol. 312, 1995 National Heat Transfer Conference, Vol. 10, Portland, ASME 1995, pp. 123-131

  • Spray Parameters and Heat Transfer Coefficients of Spray Nozzles for Continuous Casting

    • Authors: Bendig, L.; Raudenský, M.; Horský, J.
    • Year: 1995
    • Source: 78th Steelmaking Conference, Nashville, 1995, proceedings pp. 391-398

  • Výzkum chlazení povrchů s vysokými teplotami a vývoj inverzních úloh (Investigation of Cooling of High Temperature Surface and Development of Inverse Tasks)

    • Authors: Raudenský, M.; Horský, J.; Krejsa, J.; Sláma, L.
    • Year: 1995
    • Source: Conference Engineering Mechanics 95, Svratka, 1995, pp. 447-452

  • Numerická simulace chlazení pracovních válců válcovací stolice při válcování za tepla

    • Authors: Jaroš, M.; Čverčko, J.; Raudenský, M.
    • Year: 1995
    • Source: Conference Engineering Mechanics 95, Svratka, 1995., pp. 207-212

  • Experimental Study of Heat Transfer in Process of Rolls Cooling in Rolling Mills by Water Jets

    • Authors: Raudenský, M.; Bendig, L.; Horský, J.
    • Year: 1994
    • Source: Steel Research 65, (1994), No 1, pp. 29-35

  • Experimental Study of Heat Transfer in Process of Cooling by Twin Fluid Nozzle

    • Authors: Horský, J.; Raudenský, M.; Dumek, V.; Bendig L.
    • Year: 1994
    • Source: ICLASS 94, 6th Int. Conf. on Liquid Atomisation and Spray Systems, Rouen 1994, proc. pp. 1055-1061

  • Experimental Study of Cooling Characteristics in Hot Rolling

    • Authors: Horský, J.; Raudenský, M.; Sauer, W.
    • Year: 1994
    • Source: J. Mater. Process. Technol. 45, (1994), pp. 131-135, also on: Int. Conf. Metal Forming 94, Birmingham 13.-15. 9. 94

  • Novel approaches to the IHCP: Neural networks

    • Authors: Dumek, V.; Grove, T.; Raudenský, M.; Krejsa, J.
    • Year: 1994
    • Source: Int. symposium on inverse problems - Inverse problems in Engineering Mechanics, proc. pp. 411-416, Paris, 1994

  • Heat Transfer Behaviour of Work Rolls in Hot Rolling of Shaped Steels

    • Authors: Raudenský, M.; Horský, J.; Tseng, A.; Weng, C.
    • Year: 1994
    • Source: Steel Research 65, No. 9/1994, pp. 375-381

  • Heat Transfer Behaviour of Work Rolls in Hot Rolling of Shaped Steels

    • Authors: Raudenský, M.; Horský, J. Tseng, A.; Weng C.
    • Year: 1994
    • Source: ASME Winter Annual Meeting, Chicago, November 1994

  • Impingement Cooling of Rolls in Hot Rolling by Inverse Finite Element Scheme

    • Authors: Tseng A.; Bera, R.; Raudenský, M.; Horský, J.; Chang, W.
    • Year: 1994
    • Source: ASM/TMS Materials Week, October 1994

  • Influence of Random Errors to the Results of Inverse Task

    • Authors: Raudenský, M.
    • Year: 1993
    • Source: Strojnícky časopis 44, (1993, No 1) pp. 85-98. Published also in English translation in Journal of Czech and Slovak Mechanical Engineering 1993, 2 (1) p. 55-62

  • Thermal Mathematical Models and Experimental Work

    • Authors: Raudenský, M.
    • Year: 1993
    • Source: Technika a trh 2, (1993), pp. 35-38

  • Heat Transfer Coefficient Estimation by Inverse Conduction Algorithm

    • Authors: Raudenský, M.
    • Year: 1993
    • Source: Int. J. Num. Meth. Heat Fluid Flow, Vol. 3, No. 3, 1993, pp. 257-266

  • Novel Approaches to the IHCP: Neural Networks and Expert Systems

    • Authors: Dumek, V.; Druckmüller, M.; Raudenský, M.; Woodbury, K.
    • Year: 1993
    • Source: First Int. Conf. on Inverse problems in Engineering, Palm Coast, USA, June 1993

  • Experimental Study of Roll Cooling by Means of Flat and Cone Water Jets

    • Authors: Raudenský, M.; Horský, J.
    • Year: 1993
    • Source: 1st Int. Conf. on Modelling of Metal Rolling Processes, London, UK, 1993, proc. pp. 660-667

  • Experimental Study of Water Jets Cooling Effect

    • Authors: Raudenský, M.; Bendig, L.; Horský, J.
    • Year: 1993
    • Source: 11th Int. Congress CHISA 1993, Prague

  • Neural Network, Expert System & Inverse Problems

    • Authors: Dumek, V.; Druckmüller, M.; Raudenský, M.
    • Year: 1993
    • Source: Int. Conf. Application of AI in Engineering, Toulouse, France, June 1993

  • Effect of Dynamic Properties of Thermocouples on the Results of Solving the Inverse Problem of Calculating the Boundary Conditions

    • Authors: Raudenský, M.; Čarnoguská, M.
    • Year: 1993
    • Source: Transaction of Technical University of Košice 3 (4), (1993), pp. 363-369

  • Inverse Task for Determining of Heat Transfer Coefficient

    • Authors: Raudenský, M.; Dumek, V.
    • Year: 1992
    • Source: Strojnický časopis 43, No 1, 1992

  • Neural Network and Inverse Problems, Experimental Study of Water Jet Cooling of Hot Steel Surfaces

    • Authors: Raudenský, M.; Dumek, V.
    • Year: 1992
    • Source: Fifth Annual Inverse Problems in Engineering Seminar, Michigan State University, Lansing 1992

  • Experimental Study of Water Jet Cooling of Hot Steel Surfaces

    • Authors: Raudenský, M.; Horský, J.
    • Year: 1992
    • Source: Fifth Annual Inverse Problems in Engineering Seminar, Michigan State University, Lansing 1992

  • A Study of the Methods of Smoothing the Noisy Data Before their usage in the Inverse Heat Conduction Task

    • Authors: Raudenský, M.; Druckmüller, M.
    • Year: 1992
    • Source: Fifth Annual Inverse Problems in Engineering Seminar, Michigan State University, Lansing 1992

  • Thermal model of Rolls and Sheets Improvement by Experimental Study of Cooling

    • Authors: Raudenský, M.; Horský, J.
    • Year: 1992
    • Source: Journal of Materials Processing Technology, 34 (1992), pp. 247-253

  • Mathematical Simulation of the Temperature Field in Rolled Slabs in Rolling Flats

    • Authors: Raudenský, M.; Čarnoguská, M.
    • Year: 1992
    • Source: Transaction of Technical University of Košice 2, (1992), pp. 212-218

  • Thermal Model of Rolls and Sheets Improvement by Experimental Study of Cooling

    • Authors: Raudenský, M.; Horský, J.
    • Year: 1992
    • Source: International Conference FORMING 92 Krakow, 1992

  • Jet Cooling of Hot Surfaces

    • Authors: Raudenský, M.; Horský, J.
    • Year: 1991
    • Source: Hutnické listy (Metallurgical Journal) 1-2/1991, pp. 21-25

  • Temperature Field of the Alloys Strips in the Process of Hot Rolling

    • Authors: Zela, L.; Raudenský, M.
    • Year: 1991
    • Source: 4th Int. Conf. New Ways in Production and Usage of Steel Strips, Karlovy Vary 1991, pp. 170-174

  • Mathematical Model of Thermal Behaviour of Rolls in process of Hot Rolling

    • Authors: Raudenský, M.
    • Year: 1990
    • Source: 5th Steel Rolling Conference, Paper No. 62, pp. 506-511, London, 1990

  • Effect of Cooling on Temperature Stress of Rolls Applied in Metallurgical Plants

    • Authors: Raudenský, M.; Petruška, J.
    • Year: 1990
    • Source: Hutnické listy (Metallurgical Journal) 9/1990, pp. 551-555 (also published in UK by V.E.Riecansky - Technical Translations)

  • Temperature and Stress Relations in Bandage during Casting of Amorphous Bands

    • Authors: Raudenský, M.; Petruška, J.; Heger, J.
    • Year: 1989
    • Source: Journal Strojírenství 5/1989, pp. 260-265

  • Possibility of Modelling of Temperature Changes in process of Rolling

    • Authors: Raudenský, M.
    • Year: 1989
    • Source: Conference on Progresses in Forming, pp. 200-205, Ostrava, Czechoslovakia

  • Modelling Thermal Processes in Hot Rolling Stock

    • Authors: Raudenský, M.
    • Year: 1988
    • Source: Hutnické listy (Metallurgical Journal) 9/1988, pp. 623-628

  • Temperature Relations and Cooling of Working Roll during Casting of Amorphous Strip

    • Authors: Raudenský, M.
    • Year: 1988
    • Source: Hutnické listy (Metallurgical Journal) 11/1988, pp. 767-771

  • Numerical Modelling of Temperature Fields in Rolls

    • Authors: Raudenský, M.
    • Year: 1986
    • Source: 9th Conference on Tools for Rolling, pp. 95-102, Ostrava, Czechoslovakia, 1986

  • Inverse Problem of Finding Heat Transfer Coefficient along Circumference of Rolls of Rolling Mills

    • Authors: Raudenský, M.
    • Year: 1986
    • Source: Hutnické listy (Metallurgical Journal) 5/1986, pp. 321-324, (also published in UK by V.E.Riecansky - Technical Translations)

Type of publication

  • Any
  • Abstract
  • Academic work
  • Article
  • Chapter in book
  • Conference proceedings
  • PhD thesis

Categories

  • Any
  • Automotive headlamps
  • Continuous casting
  • Flash line
  • Heat treatment
  • Hydraulic descaling
  • Inverse heat conduction
  • Other
  • Polymeric hollow fibre heat exchanger
  • Rail
  • Roll cooling
  • Separation processes
  • Strips and sheets cooling
Copyright © Heat Transfer and Fluid Flow Laboratory 2025. All rights reserved.

Search